OPERATING INSTRUCTIONS

CONTENTS

Connecting the Detachable Power Supply Cord

Your deep fryer has been specifically designed with your safety in mind. This unit has a unique detachable power supply cord. This power supply cord is designed to “Break Away” from the fryer body in the event that the supply cord is inadvertently pulled. This is intended to prevent the tipping of the appliance and hazardous spillage of hot oil.

The female receptacle portion of the power supply cord is permanently attached to the rear of the the control panel. To connect the male power cord plug to the female receptacle on the appliance, orient the male plug so that it mates with the female receptacle. The male plug can only be inserted one way. If the male plug will not go into the receptacle on the appliance, rotate the male plug 180° and insert again.

Important: Should the male plug become detached from the appliance during use, it is important to:

1.Unplug the power cord from the wall outlet.

2.Turn off the appliance at the control panel.

3.Re-attach the power cord to the appliance.

4.Re-connect to power outlet.

5.Turn the appliance back on.

Cleaning Instructions Warning: Always remove the plug from the wall socket before cleaning. Allow the deep fryer and the oil to cool completely (approximately 2 hours) before cleaning. Never immerse the control panel, cord or plug in water or any other liquid.

Follow the cleaning

instructions on

page 4. (Before using

for the First

Time)

Never immerse the

control panel, cord

or

plug in water or any other liquid.

 

Do not place the

control panel, cord or

plug

in the dishwasher.

 

Clean the control panel

only with a

damp cloth.

 

The oil container,

 

frying basket, lid

cover and filter can be

washed in the

dishwasher.

 

The body of the deep

fryer can be

washed in warm soapy

water. Do not

put the body of the

deep fryer in the

dishwasher.

 

How To Reset the Deep Fryer

 

 

If for some reason the deep fryer stops heating, the reason might be that the safety re-set switch has tripped. To re-set the the deep fryer, follow the instructions listed below:

Push the thermostat re-set button located on the back of the control panel. (Fig. 8) The unit will beep to

indicate that it has re-set.

Reset

Important Safeguards ………………………………………………………….. 1

Special Safety Instructions ……………………………………………………. 1

Main Components ……………………………………………………………... 3

Using for the First Time …………….…………………………………………. 4

Prior to First Use, Clean the Unit Thoroughly …….…………………………. 4

Filling the Stainless Steel Container With Oil …………..……………………. 4

Using Solid Fat …………..……………………………………………………… 5

Installing the Control Panel Into Its Place ……..……………………………... 5

Using the Electronic Deep Fryer ………………………………………………. 5

Pre-Heating ………………….………………………………………………….. 6

Filling the Frying Basket ……….………………………………………………. 7

Frying Food …………………………………….……………………………….. 7

At the End of Cooking ………………….………………………………………. 7

Frying Tips ……………………………..………………………………………... 7

Temperature Settings ………………………………………………………….. 8

Filtering and Changing the Oil ………………………………….…………….. 8

Connecting the detachable Power Supply Cord ……………………………. 9

Cleaning Instructions ……………………….………………………………….. 9

How to Reset the Deep Fryer …………………………………………………. 9

Helpful Hints …………………………………………………………………….. 10

RESET

Fig. 8

92

Page 3
Image 3
Euro-Pro F1068H owner manual Operating Instructions Contents