Euro-Pro SC618HZ owner manual Features Of Steam Cleaner, Operatinginstructions, Components

FEATURES OF STEAM CLEANER

OPERATINGINSTRUCTIONS

Your handheld steam cleaner is a very versatile tool. Used correctly it will help make many household cleaning tasks faster and easier. Be sure to carefully read all the information contained in this booklet before using this appliance.

High temperature steam can make it easier to remove stubborn household dirt from hard surfaces such as ovens, stove tops, kitchen counters, sinks, tubs, bathroom tiles, windows and mirrors without the need for harsh chemical cleaners. The appliance has various attachments which enable it to be used for cleaning different types of surfaces such as:

1.Upholstery, sealed grout, bathroom/kitchen tile, stovetops.

2. Easily cleans difficult to reach areas with the concentrator such as faucets, etc.

3.Ideal for windows, mirrors, glass doors, etc.

4.Fabrics, window coverings, pillows, bedding etc.

5.Hard surface areas such as counters, sinks, shower door tracks, etc.

CAUTION: Press steam trigger intermittently no more than once every 1 or 2 seconds. Rapid pressing in succession will cause water leaking and spitting which could then burn the user’s hand. Wait for steam pressure to reduce before pressing steam trigger again. By pressing intermittently you will note a rhythm for maintaining a continuous flow of steam without any water dripping or leaking.

NOTE:First usage may require 6-10 rapid pushes on steam push button before steam exits. Keep pressing for a few seconds until steam has developed from first rapid depressing of steam trigger, then you can continue intermittent pressing of steam trigger as detailed above.

IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance. Use regular water or distilled water if the tap water in your area is very hard.

Components

Power “On” Light (red): This light will illuminate when the unit is plugged into the 120V wall outlet and will remain on until the unit is unplugged.

CAUTION: Read the instructions for “Filling the Water Tank” before opening the Water Tank Cover. Always unplug before filling.

Filling Your Steam Cleaner With Water

IMPORTANT: Always insure that the unit is “UNPLUGGED” from the wall receptacle prior to initial filling or re-filling the water tank. Use tap water or distilled/purified water if the tap water in your area is very hard. WARNING: Never attempt to fill this unit under a water tap, always use the filling flask that is provided. Failure to follow these steps will cause the water tank to overfill and may pose an electrical safety hazard.

Step 1: Before filling the steam cleaner, make sure that the unit is NOT plugged in.

Step 2: Hold unit upside down and remove the water tank filling plug. (See caution above.)

Step 3: Using the filling flask add

8 US Fl. Oz. (240 ml) of water. Do not overfill. (Fig. 1) Replace the water tank filling plug making sure that it is firmly in place.

Fig. 1

To Use Your Steam Cleaner

Step 1: Connect desired attachments onto the concentrator nozzle Step 2: Plug the unit into a standard

(120 volt, grounded) wall receptacle. The red power light will now illuminate.

Step 3: Allow approximately 30 - 60 seconds for unit to reach its working temperature. The blue steam ready light will illuminate to indicate that the steam is ready.

Step 4: Upon initial use, some water will come out from the nozzle of the attachment. This is normal.

IMPORTANT: When the steam cleaner has run out of water, steam output will decrease and then cease.

NOTE: First usage may require 6-10 rapid pushes on steam push button before steam exits. Keep pressing for a few seconds until steam has developed from first rapid depressing of steam trigger, then you can continue intermittent pressing of steam trigger as detailed above.

IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance. Use regular tap water or distilled/purified water if the tap water in your area is very hard.

CAUTION: Press steam trigger intermittently no more than once every 1 or 2 seconds. Rapid pressing in succession will cause water leaking and spitting. Wait for steam pressure to reduce before pressing steam trigger again. By pressing intermittently you will note a rhythm for maintaining a continuous flow of steam without any water dripping or leaking.

Using the Fixed Concentrator Nozzle

Using the steam cleaner with the concentrator nozzle is very useful for cleaning surfaces that are difficult to reach. (Fig. 2) It is ideal for radiators, door and window jambs, shutters and sanitary fixtures.

Concentrator

Nozzle

4

Fig. 2

5