INSTRUCTIONS FOR USING THE WASHER
Below are instructions for using the machine. Refer to pages 8 and 9 for explanations of the control panel functions and programs.
1. | Before placing the items in the machine, sort the laundry by type of fabric and care label instructions | ||
| (see page 7). |
|
|
2. | Make sure nothing is in the garment pockets to avoid damage to clothes, the machine or the filter. | ||
3. | Close zippers and hooks to prevent snagging. |
|
|
4. | Open the door (Fig. 8). |
|
|
5. | Load the laundry and close the door securely. |
|
|
6. | Pour detergent and fabric softener into the appropriate compartments in the |
|
|
| detergent drawer (Fig. 9). |
|
|
| NOTE: Use only low sudsing detergent made for |
|
|
| follow label instructions. The amount of detergent varies among the different |
|
|
| brands, but for most detergents, you need only one or two tablespoons. Too | FIG. 8 |
|
| much detergent could leave a residue on your clothes and possibly damage |
|
|
| the appliance. |
|
|
| Do not add detergent to the prewash compartment unless you are using a | Prewash | Main Wash |
| wash program that has a prewash cycle; otherwise, the machine could |
|
|
| oversuds and spill onto the floor. Also, do not use liquid detergent for a |
|
|
| prewash program because the detergent will be washed out the back of the |
|
|
| drawer. |
|
|
NOTE: It is not recommended that you use bleach in your Eurotech washer. If |
| Fabric |
you need extra whitening, we recommend that you use a | FIG. 9 | |
detergent with bleach additive. |
| Softener |
|
|
NOTE: Excessive use of fabric softener can damage garments.
7.Close the detergent drawer securely.
Caution! To avoid water spillage, do not open the detergent drawer while the machine is operating.
8.Press the On/Off button. (The indicator light should come on.)
9.Turn the Program Knob to the desired program.
10.Turn the Spin Speed Knob to the desired speed.
11.Press the desired option buttons (Prewash or Extra Rinse).
12.Press the Start button. The machine will start
NOTE: For safety reasons, there is a
1 0
