Event electronic manual S100 Active Low Frequency Monitor Specifications

S100 Active Low Frequency Monitor Specifications

Low Frequency Driver

8” polypropylene cone with damped rubber surround and high-temperature voice coil.

Frequency Response

35Hz – 120Hz, -3dB

Amplifier Power

100W, Linear

LFE Crossover 120Hz, 2nd-order

Noise

>70dB below full output

Inputs

Mono line input with 1/4” connector; Left and Right line inputs with RCA connectors; All unbalanced.

Pass-Through Outputs

Two RCA mains monitor channel pass-throughs

Controls

Input Sensitivity; mains power; operating voltage selection; on/off mute (footswitch- controlled)

Power Requirements

200VA, User selectable 110V~ 60Hz or 220/240V~ 50-60Hz mains

Polarity

Positive signal at input produces outward cone displacement

Cabinet

5/8” vinyl-laminated MDF, internally insulated

Dimensions

12” W x 16-5/8” H x 10-3/4” D

Weight 32lbs

Specifications subject to change without notice.

3