Event electronic SHC8525 manual English, Wrong battery orientation, your hearing

SHC8525 16-12-2005 12:17 Pagina 9

	ENGLISH 9
Wrong battery orientation	Reposition the batteries according to
	the engraved polarity symbol.
No power supply to transmitter	Make sure the docking station is
	connected to the local mains power
	supply through an adapter and follow
	step 5 to 7.
Battery power running low	Follow steps 5 to 7 to recharge the
	system.
Audio source not connected	Make sure the audio output of your
	audio source is connected to the
	3.5 mm STEREO INPUT JACK of
	your transmitter. Follow step 9 to 12.
Audio source is off	Turn on your audio source.
Volume level set too low	Adjust the volume level of your
	audio source or the headphone.
	Hearing Safety: Continuous use at a
	high volume may permanently damage
	your hearing.
Audio output level low	In case of audio sources with
	adjustable output level, adjust the
	output level to a higher and
	non-distorted level. IMPORTANT:
	In case of certain TVs, the headphone
	jack output level can only be adjusted
	after accessing the TV on-screen menu.
Headphone not tuned to	Select 1 of the 3 frequency options
the transmitter	provided in the headphone (i.e. the
	one selected at the transmitter) by
	adjusting the MANUAL TUNING
	SWITCH, then the headphone will
	quickly tune to the transmitter.
Interference from other	1) Alter the transmitter’s frequency
radio sources	channel. Select 1 of the 3 options for
	best reception.We advise you to
	select channel 1 as the first option.
	Next adjust the headphone’s tuning
	channel as described above.
	2) Move transmitter or headphone
	elsewhere
Receiver too far away from	Move closer for reception
transmitter
Transmitter other than	Make use of the SHC8525
SHC8525 is used	transmitter provided. Some
	transmitters already built into other
	equipment may not be compatible
	with the SHC8525 headphone
	because of the advanced
	technologies used.