Notebook User Guide
yFor the power supply of this equipment, an approved power cord has to be used.
yMake sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.
yBefore cleaning the computer, make sure it is disconnected from any external power supplies (i.e. AC adapter).
2.3Starting Your Computer
The Power/Resume button is found on the top of the base unit. Press the Power/Resume button to start your computer and check that if the Power LED turns on.
After a few seconds, the computer’s display will turn on and your computer will begin to execute the Power On Self Test or POST to check if all system components are running properly. Any error found during the test will be displayed on the screen and may generate short beep sound as well.
After the test, the screen will also display a message "press <F2> to enter SETUP". You don’t need to run this program at the moment as your dealer
36