○1 Camera Cover
This cover will protect the camera for avoiding dust and damage.
○2 Lens
This
○3 Base
The camera unit sets in the dome base, when it is shipping from the factory.
○4 Focus Ring (for
To set the focus, and loosen the Focus ring knob, please turn the ring toward <F> or <N> if necessary.
○5 Zoom Ring (for
If you like to adjust the viewing range, please loosen or tighten the Zoom ring. Turn the ring towards <W> for Zoom out or <T> for Zoom in. When camera setting is finished, please tighten the zoom ring knob.
○6 Flickerless
The factory setting is FL OFF.
○7 Mirror
The factory setting is Mirror OFF.
○8 Auto Gain control on/off switch
The factory setting is AGC ON.
○9 D/N
The factory setting is D/N OFF.
○10 Monitor Test Pin
For monitor use. When setting up the camera, connect a monitor to this video output pin and to the GROUND pin using alligator clip cables, then use the image displayed on the monitor, set the surveillance angle.
○11 Level Volume Control (for
3