EverFocus EHD320 user manual LL Line-Lock Off/On, AGC Automatic Gain Control Off/On

Dip Switch Functions

	ALC
Video	Video
GND	GND
ON	ON
	LEVEL
OFF LL AGC BLC FL ES	OFF LL AGC BLC FL
Board Lens	Vari-Focal Lens

LL (Line-Lock) Off/On

To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on).

Set the line-lock off, the camera will synchronize to the internal time base. Set the line-lock on, the camera’s vertical synchronization can be driven by the AC signal in the power lines.

Note: Line-Lock sync mode operation is possible only when used with an

AC power source; it’s not possible with a DC power source.

The default setting is ON.

AGC (Automatic Gain Control) Off/On

AGC ON: The sensitivity increases automatically when light is low.

AGC OFF: A-low-noise picture is obtained under a low light condition.

The default setting is ON.

9