5. Wire Connection

Termination Board

Micro Switch for Alarm trigger

 

 

 

Power In (+)

 

Alarm COM

GND

 

 

Video

Power In (-)

V. Phase Adjustment VR

Alarm NO

Alarm NC

 

 

 

 

 

 

Figure 7

Connect the power supply cable (AC24V/DC12V), video output and alarm output to the proper connectors shown as Figure 7.

The V. Phase adjustment screw is located on the termination board. The vertical phase may require adjustment to synchronize the vertical phase of the camera with other camera in the system when it is to be used in the line-lock sync mode. Make the adjustment when the vertical phase of the camera does not match with other cameras.

7

Page 8
Image 8
EverFocus EHD350 specifications Wire Connection Termination Board