Attach the base to the wall or ceiling, fix the base by the 4 setscrews attached in the accessory pack. The dome is weighted 1.7kg, please make sure if the mounting is strengthened enough to support it, if not, please reinforce the mounting according to the environment.

Note: The diameter of the screw hole isψ4.7mm.

Back conduit entry (PF1/2)

The camera comes with a conduit plug pre-installed in the PF 1/2 conduit entry on the side. The screw can be removed and installed in the back conduit entry. Loosen

the conduit plug setscrew (as shown in

Conduit plug

Side conduit entry (PF1/2) Figure 5

Figure 5) before removing the conduit plug.

Caution: To prevent moisture leaking into the housing, apply an appropriate gasket or sealant around the conduit connection.

5

Page 6
Image 6
EverFocus EHD525EX specifications Back conduit entry PF1/2