- 17 -
4. MAIN MENU
4.1 Setup ID
Camera Menu: Display ID/Camera ID/ID position
DISPLAY ID: ON/OFF.
The camera ID can be displayed on the screen by setting “ON”.
CAMERA ID: When “ON” is selected, user can set the Camera ID up to 12
characters. Please refer to the table below for detailed character patterns. Use the
cursor button e or f to locate characters (characters will display in the same
order as shown in table), press the SET button to choose the character. Use the
cursor button f to move to the next character for setting.
Once the characters of camera ID are all selected, press the SET button for 1 sec
to close the menu and the Camera ID will show on the screen as the figure below.
CAMERA ID MENU
> DISPLAY ID ON
CAMERA ID:
ID POSITION UP-LEFT
PREVIOUS PAGE.
MAIN MENU
>SETUP ID..
LENS DC..
WDR..
WB CONTROL ATW
AGC ON
LOW LIGHT SLOW-SH..
SYNC..
DAY/NIGHT
EXIT MENU
Ex: CAMERA ID: EverFocus
101