33
the tour after pressing Enter. To preset a tour before running it is
necessary.
Preset a one-way tour: Press Set + Tour to preset an one-way tour.
The system will ask you to enter preset position numbers (The positions
need to be preset). After finish entering all positions, press Stop to quit,
and then press Enter to save the tour.
To-and-fro tour mode: Press Shift + Tour to run a to-and-fro tour. The
system will ask you to enter the tour number you would like to run, and
starts the tour after pressing Enter. To preset a tour before running it is
necessary.
Note: The difference between the One-way tour mode and To-and-fro tour
mode is that the return modes are different. For example: There is a tour with 3
preset positions 1, 2 and 3. The camera runs 123123 in the One-way
tour mode, and 12321 in the To-and-fro tour mode.
Camera:0001
Run Tour:__[1-16]
Set Camera:0001
Tour:__[1-16]
Add Position#01:___
[ENT / STOP]
Tour:001 Pos#01:001<
[ENT] to save