EverFocus EQ350HQ

VD/DD (Auto Iris lens Type)

For video drive auto iris lens, please set switch to VD. For direct drive iris

lens, set switch to DD. The default setting is DD. Wire the cable of lens to

lens connector according to the following table.

Pin1 Pin2 Pin3 Pin4 Lens Connector

Video Drive +12V GND VD-IRIS GND

Direct Drive Cnt- Cnt+ Drv+ Drv-

6. IRIS Level Control

Brightness Level can be adjusted from the IRIS level VR while using the

direct drive lens.

??Turn counterclockwise to L to get darker picture.

??Turn clockwise to H to get brighter picture.

7. V-Phase Adjustment Screw

The vertical phase may require adjustment to synchronize the vertical phase

of the camera with other camera in the system when it is to be used in the

line-lock sync mode. Make the adjustment when the vertical phase of the

camera does not match with other cameras.

8. Mounting Base and Fixing Screws

To use when the mounting bracket is required while mounting the camera.

The mounting base can be attached to either the top or the bottom of the

camera, fix the mounting base onto the camera by using the 4 supplied

fixing screws.

9. Video Output Connector

BNC VBS 1.0 Vp-p, 75ohm

10. Power Cable (EQ350HQ)

11. DC12V/AC24V Screw Terminals (EQ350HQA)

12. Audio Output(optional):Connect with an audio device, RCA connector