9. OSD MANUAL
- USER SET
Using Set button, display [USER SET] sub menu.
- COMM/GPIO SET
Using Set button, display [COMM/GPIO SET] sub menu.
- FOCUS MODE
In focus mode, the iris becomes fully open, electronic shutter controls the light level, and the TV out screen zooms into the center in order to make focusing easier. When in Focus Mode, the OSD Menu is not displayed. The OSD Menu can be toggled on and off using the Left / Right button.
> TV Out Image
FOCUS MODE OFF | FOCUS MODE ON |
- LANGUAGE
Select OSD Language. (Only English is available, currently)
• USER SET (Sub Menu)
[ USER SET ]
SAVE USER SET LOAD USER SET 
CLEAR USER SET
FACTORY RESET 
CAMERA RESET
ESC
EXIT
- SAVE USER SET
Saves a copy of the current configuration set by the user into a separate memory area. If user set data has been saved, an [O] mark is displayed and if not, an [X] mark is displayed.
[X]User Set settings can NOT be loaded automatically when the camera is powered on. They can only be loaded manually via the “LOAD USER SET” OSD choice. To make the values in a User Set become the configuration loaded when the camera is powered on, first load that User set, then choose “SAVE AND EXIT” in any of the OSD Screens; the current User Set OSD Settings will be written to the power on configuration. These steps effectively copy a User Set to the power on configuration.
- LOAD USER SET
Load the saved user set, and applies to Camera.
-CLEAR USER SET
Clear all saved user set.
-FACTORY RESET
Clear all setting and initialize to factory setting. Clear user set.
-CAMERA RESET
Reboot the Camera.
26
