Replacement Parts

Contact your local Everpure dealer for filter cartridges or system replace- ment parts.

Description	Part Number
Inlet/outlet pressure gauge	EV3114-09
Inlet/flushing valve	EV3114-07
O-ring for prefilter or SR-X	EV3112-40
Prefilter bowl	EV3112-38
SR-X bowl	EV3112-39
LPA pressure switch	EV3016-41
Wrench	EV3112-41

System Tested and Certified by NSF International against NSF/ANSI Standards 42 and 53 for the reduction of:

Standard No. 42 — Aesthetic Effects Chemical Reduction

Taste and Odor Chlorine

Mechanical Filtration

Particulate Class I: 99.2% reduction of particles one-half micron and larger in size

Standard No. 53 — Health Effects Mechanical Filtration

Turbidity (MC, MC2 only)

Cyst (MC, MC2, XC, XC2 only)

Asbestos (MC, MC2 only)

Limited Warranty

Commercial Water Treatment Equipment

You have just purchased one of the finest water treatment units made. As an expression of our confidence in Everpure products, this product is warranted against defects in material and workmanship to the original end-user when installed in accordance with Everpure specifications. The warranty period commences from the date of purchase and is administered as follows:

For a period of ONE YEAR	replaceable elements (i.e., filter & water treatment cartridges)*
For a period of FIVE YEARS	the entire system (excluding replaceable elements)

*This is for material & workmanship, not filter or water treatment cartridge life.

The unit must be used in operating conditions that conform to Everpure’s recommended design guidelines. This warranty will not apply if the unit has been modified, repaired or altered by someone not authorized by Everpure.

If a part described above is found defective within the specified period, you should notify Everpure technical service at the phone number listed below. Any part found defective within the terms of this warranty will be repaired or replaced (at Everpure’s discretion) by your local dealer or Everpure technical service. You pay only freight from our factory and local dealer charges. Any repaired or replaced warranty item will be incorporated under the original warranty terms of the existing system.

We are not responsible for damage caused by accident, fire, flood, freezing, Act of God, misuse, misapplication, neglect, oxidizing agents (such as chlorine, ozone, chloramines and other related components), alteration, installation or operation contrary to our printed instructions, or by the use of accessories or components which do not meet Everpure’s specifications. Refer to the specifications section in the Installation and Operating manual for approved application parameters.

Our product performance specifications are furnished with each water treatment unit. TO THE EXTENT PERMITTED BY LAW, EVERPURE DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE; TO THE EXTENT REQUIRED BY LAW, ANY SUCH IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE PERIOD SPECIFIED ABOVE FOR THE ENTIRE WATER TREATMENT UNIT. As a manufacturer, we do not know the characteristics of your water supply or the purpose for which you are purchasing this product. The quality of water supplies may vary seasonally or over a period of time, and your water usage rate may vary as well. Water characteristics can also differ considerably if this product is moved to a new location. For these reasons, we assume no liability for the determination of the proper equipment necessary to meet your requirements, and we do not authorize others to assume such obligations for us. Further, we assume no liability and extend no warranties, express or implied, for the use of this product with a non-potable water source or a water source which does not meet the conditions for use described in the owner’s guide or performance data sheet for this product. OUR OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED TO THE REPAIR OR REPLACEMENT (AT EVERPURE’S DISCRETION) OF THE FAILED PARTS OF THE WATER TREATMENT UNIT, AND WE ASSUME NO LIABILITY WHATSOEVER FOR DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, GENERAL OR OTHER DAMAGES.

Some states do not allow the exclusion of implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Similarly, some states do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Consult your telephone directory for your local independently operated Everpure dealer, or write Everpure for warranty and service information.

For sales, replacement components, and service, contact your Everpure dealer or:	Technical Service
Everpure, LLC: 1040 Muirfield Drive • Hanover Park, Illinois 60133 • 800.323.7873	800.942.1153
In Europe: Toekomstlaan 30 • B-2200 Herentals, Belguim	www.everpure.com
In Japan: Hashimoto MN Bldg. 7F • 3-25-1 Hashimoto Sagamihara-Shi • Kanagawa 229-1103, Japan

Printed in U.S.A.

EV3112-78 Rev E AP08

EV3112, XC2, MC, XC specifications

Everpure's MC, XC2, EV3112, and XC filtration systems represent the pinnacle of water purification technology, combining robust engineering with advanced filtration capabilities. Designed for a variety of applications, these systems cater to businesses in the foodservice, hospitality, and coffee industries, ensuring that water quality meets the highest standards.

The MC series provides a versatile solution for foodservice operations, focusing on the removal of chlorine, sediment, and other impurities. It features a high-capacity filter designed to deliver consistent water quality, enhancing the flavor of beverages and the quality of food preparation. The innovative design ensures easy filter changes and maintenance, allowing businesses to minimize downtime.

The XC2 is particularly well-regarded for its dual filtration technology which targets both fine and coarse particles. This system is engineered to reduce scale buildup, which can be detrimental to equipment longevity. Furthermore, the XC2 integrates a unique activated carbon layer that not only enhances taste but also eliminates odors, presenting a comprehensive solution for establishments serving water and beverages.

Everpure's EV3112 brings a robust filtration approach with a focus on larger operations. Capable of delivering high volumes of filtered water, this system is equipped with a three-stage filtration process, ensuring maximum impurity removal. Its proprietary micro-filtration technology captures particulates down to 0.5 micron, offering high efficiency while also maintaining the essential minerals that enhance water taste.

Complementing these systems, the XC offers exceptional performance specifically geared towards espresso machines and coffee brewers. With fine filtration capabilities, it protects sensitive equipment from clogging and scale build-up while improving the extraction process for better-tasting coffee. The XC utilizes advanced carbon block technology, which is instrumental in retaining flavor while filtering out undesirable contaminants.

Collectively, these Everpure systems showcase the company’s commitment to quality, reliability, and innovation in water purification. Their cutting-edge technologies, along with user-friendly designs, make them an excellent choice for businesses that prioritize not only the quality of their water but also the efficiency and performance of their equipment. Whether for restaurants, cafes, or large-scale facilities, Everpure’s filtration solutions are engineered to meet the diverse needs of the food and beverage industry while ensuring that water quality remains consistently high.

Everpure MC, XC2, EV3112 Replacement Parts, Commercial Water Treatment Equipment

Models: EV3112 XC2 MC XC