780i 3-Way SLI Motherboard
EVGA
14
IDE
Serial ATA II
Chassis Fans
Rear panel USB 2.0 Adapter
Expansion slots
CMOS jumper settings
See Figure 1 on page 7 to locate the connectors and jumpers referenced in the
following procedure.
Power Connections
To support 3-way SLI, this motherboard has the following specific power
supply requirements:
Minimum 1000 W peak power
Six PCI-E power connectors configured in either of the following
configurations (see Figure 3):
¾ Four 6-pin (3x2) and two 8-pin (4x2) PCI-E power connectors
or
¾ Six 6-pin (3x2) PCI-E power connectors
8-pin (4x2) PCT-E Connector 6-pin (3x2) PCI-E connector

Figure 3. Power Supply Connectors