EVGA GTX 295 quick start Connector Power pin-6, Connector HDMI, Connectors I-DVI, Connector SPDIF

.cord power the disconnect and computer your off Turn 2	Edition Special Precision EVGA -
.Program a Uninstall	drivers bit)-(32/64 Vista and XP Windows Features -
	Features: CD Installation Driver▪
> Programs > Panel Control > Start to go Vista, Windows In
	Adapter VGA-to-DVI▪
.computer your on installed driver graphics current the Remove1
	Cable In-Audio SPDIF▪
	Manual Printed and Guide Start Quick▪

.card graphic the install you before (unplugged)	Card Graphic 295 GTX GeForce EVGA▪
removed be computer the to power all that important is It
295 GTX GeForce	Equipment Included
EVGA the Installing	bit-64 or bit-32 XP, Windows Microsoft▪
	recommended) bit-(64 bit-64 or bit-32 Vista, Windows Microsoft▪
Connector Power pin-6			System: Operating
Connector HDMI
Connectors I-DVI	.section Products Certified the check and com.slizone.www visit
	configurations, SLI for recommendations supply power For
Connector Power pin-8			.connectors
	power Express PCI pin-6 available two or connector
	pin-8 Express PCI one and connectors power disk hard
	available two or connector power Express PCI pin-6 One▪
	Supply: Power System
	.card graphics each for slot graphics x16 width-dual
	one with motherboard ready-SLI an need you configuration,
	SLI Quad For .slot graphics x16 width-dual one with
	motherboard compliant-0.2 Express PCI or	®	Express PCI▪
			Motherboard:
Connector SPDIF	Requirements
	System Minimum
Connector SLI

Driver Installation

With the hardware installed, it is now time to install the graphics driver.

1Power up your computer.

2Insert the driver installation CD or double click on the GeForce driver executable file that can be downloaded at www.evga.com/support/drivers. The Setup program takes over and will walk you through the driver installation process.

3You may need to reboot your PC once the driver installation is complete.

Enabling SLI

If you have installed multiple graphics cards in your system for SLI, you can set your SLI configuration in the NVIDIA Control Panel:

Note: Quad SLI is only supported under the Windows Vista operating system.

4 In Windows Vista, go to Start > Control Panel > Additional Options and select the NVIDIA Control Panel icon.

5 Click on Set SLI and PhysX Configuration in the left task pane and select Enable SLI and click Apply.

6 Click Yes on the Applications Shutdown Required window.

Quick Start Guide

GeForce GTX 295