Evolution Technologies MK-416C manual Setting Up The Librarian Software, Librarian Overview

Evolution MK-425C/449C/461C Advanced User Guide

Setting Up The Librarian Software

Before you start using the Librarian, check that the MK-425C/449C/461C has been selected as input and output device.

1.Select MIDI Setup from the Options menu.

2.Ensure the USB driver for you MK-425C/449C/461C is selected in the “Inputs” Column.

If you are using native drivers this may be named “USB Audio Device”.

1.In the “Outputs” column, select the USB driver for you MK-425C/449C/461C If you are using native drivers this may be named “USB Audio Device”.

You should now be ready to use the Librarian software with you Evolution keyboard.

Librarian Overview

As you can see from the screenshot of the Librarian on page 16, you can save, load, receive or send the complete content to and from either Bank columns.

To transmit the complete content of your MK-425C/449C/461C to the librarian, simply press the “Receive” button on the Librarian software.

This process can only be completed successfully if the USB drivers for your keyboard have been selected correctly, as described in the “Setting Up The Librarian Software” section.

Once you have Received data from the keyboard, the memories are displayed in the column.

Organising Presets Received From A Device

You can name the memories as you like. To re-name a memory, double-click on the memory. You can then move memories around by dragging them to a new position, or using the copy buttons between the two windows.

These buttons are defined below:

Will copy the selected memory in Bank 2 to Bank 1.

Will copy the selected memory in Bank 1 to Bank 2.

Will copy all memories in Bank 2 to Bank 1.

Will copy all the memories in Bank 1 to Bank 2.

Will undo the last copy you made. Only the last copy is remembered.

It’s a good idea to decide which column is your master column, to avoid confusion and maybe loosing hours of work.

17