Excalibur electronic 187BK manual Connecting your iBlaster Clock Radio to external equipment

make sure an iPod is not docked in the iBlaster Clock Radio.

Plug one end of the audio patch cord (included) into the headphone or LINE-OUTjack on your device and the other end of the patch cord into the iBlaster Clock Radio LINE-INjack, locat- ed on the back of the unit.

Press the iPod button on the iBlaster/ Clock Radio (or PLAY PAUSE button on the remote). The AUX icon will appear, indicating AUX playing mode.

placed up to 12 inches away from the unit for best reception. You can also rotate the AM antenna loop to improve recep- tion.

To listen to the radio, first press the RADIO button on the iBlaster Clock Radio or on the remote control. The radio fre- quency will appear on the top right corner of the display.

Press the AM/FM button on the iBlaster Clock Radio or on the remote control to select AM or FM radio stations.

Connecting your iBlaster Clock Radio to external equipment

You can connect the iBlaster Clock Radio to another line- level device, such as an amplifi- er or recording device through the LINE-OUTjack located at the back of the unit. The VOLUME setting on the iBlaster Clock Radio does not affect the line level. Adjust the VOLUME through the device you connect to.

You can connect your iBlaster Clock Radio to your television by using the OUTPUT terminals on the back of the unit. Before connecting, be sure to set your iPod video to television. The OUTPUT terminals output the video and audio signals shown on the television.

-If your television has an S VIDEO INPUT terminal, connect your iBlaster Clock Radio to it. If not, connect it to the video terminal, as shown in Figure 9.

Turn on and play your device. Use the VOLUME knob on the left side of the unit to adjust the

volume.

To turn OFF/the unit, press the

ALARM RESET POWER OFF/ but-

ton (or the POWER ON OFF but- ton on the remote). Be sure to turn off your device as well.

Listening to Radio

To listen to the radio, first fully extend the FM antenna wire to improve reception.

NOTE: Do not strip, alter or attach to other antennas. The AM antenna loop should be 12

Turn the SETTINGS knob on the iBlaster Clock Radio or the >> or << button on the remote control to find your desired sta- tion.

Turn the VOLUME knob on the iBlaster Clock Radio or the VOL+ or VOL- buttons on the remote. control to adjust the VOL-

UME

To turn the radio/ OFF, press

the ALARM RESET POWER OFF

button on the iBlaster/ Clock Radio or the POWER ON OFF but- ton on the remote control.

Figure 9: Connecting your iBlaster Clock Radio to external equipment

13