CONTROL PANEL
Model | Container |
| Controls |
EXB4300 | 64 Oz. / 1800ml | Off/Low/High Knob | Pulse Switch |
EXB4300L | 82 Oz. / 2300ml | Off/Low/High Knob | Pulse Switch |
|
|
|
|
Blade Agitator Assembly
Use caution when handling the blade; it is sharp. Use a soft cloth to grab the blade when inserting the blade assembly through the container.
Retainer Nut and Blade Removal
•The retainer nut is easily removed using the disassembling tool (DT). Turn container upside down and insert the disassembling tool on the holes of the nut. Push the tool counterclockwise to loosen nut (Step 1). Once loosened, remove by hand.(Disasembly tool sold separately)
•To release the blade use the other end of the DT while grabbing the gear with backup pliers and turn counterclockwise (Step 2)
Care and Cleaning
Motor Base
1.Unplug the power cord.
2.Wipe outside surface with a damp soft cloth or sponge, which has been rinsed in a mild solution of liquid dish soap and warm water. NEVER
IMMERSE MOTOR BASE IN WATER OR OTHER LIQUID.
3.Wipe dry with a clean, soft cloth.
Control Panel
Gently wash the front panel with a soft cloth and low pH balance soap.
NOTE: Be sure to wring excess water out of cloth or sponge when cleaning around the controls, drive socket or any electrical part.
9
