PRIOR TO FIRST USE
•Remove all packaging and transport materials from the inside and outside of the appliance.
•Wipe the inside and outside surfaces of the appliance with a damp cloth and let appliance dry.
•Completely unwind the cord.
USE
1.Plug in and switch on the power. The appliance beeps once and immediately begins to heat up; the power indicator (b) on the display (2) flashes.
2.Open the lid (1) and add a little grease to the hollow/ hollows of the base part (4). Close the lid again.
3.Once the appliance is ready for use the appliance beeps a few times and the indicator for adding waffle mix (f) flashes.
4.Open the lid and pour a portion of waffle mix into the hollow/hollows of the base part.
o Be careful not to add too much waffle mix; the mix must not spill over the edge of the hollow.
5.Close the lid again and set the cooking time using the control buttons (3). There are 8 settings, where 1 corresponds to 1 minute, and 8 corresponds to 4.5 minutes.
o Press the button + or – until the required number
of columns are shown on the power indicator. Each time you press the button, the time increases or decreases by 30 seconds.
o When the waffles are cooking, the symbol for cooking waffles (e) flashes together with the symbol for lightly cooked waffle (a) or thoroughly cooked waffle (c) depending on the chosen setting
o The appliance remembers the setting so you can cook several waffles with the same cooking time.
o If you do not set the time, the appliance will use the default setting of 5 columns. This corresponds to 3 minutes and the result is a golden waffle.
6.Once the waffles are cooked, the appliance beeps several times and the symbol for cooked waffle (d) flashes. Open the lid and remove the cooked waffles with a wooden or plastic spatula. Never use metal utensils as they may scratch the
7.Remove the plug from the socket once you have finished using the appliance.
Caution! You may experience a small amount of smoke or odour the first few times the appliance is used.
This is due to excess material from the manufacturing process being burnt off. This is completely normal, and the smoke/smell will soon disappear.
Caution! The appliance has an
STORAGE
•Ensure that the appliance is clean, dry and completely cool before storing it.
•Store the appliance in a clean and dry place, for instance in its box.
•Do not place heavy objects on top of the appliance.
•The cord must not be twisted or wound around the appliance.
•Never hang the appliance by the cord.
CLEANING
•Remove the plug from the wall socket and allow the appliance to cool down before cleaning.
•The appliance, cord or plug must not be placed in water or any other liquid.
•Clean the appliance by wiping it with a damp cloth.
A little detergent can be added if the appliance is heavily soiled.
•Never use a scouring pad or any form of strong solvent or abrasive cleaning agent to clean the appliance, as those may damage the inside and outside surfaces of the appliance.
•Ensure that the appliance is completely dry before storing it.
INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT
Please note that this Adexi product is marked with this
symbol:
This means that this product must not be disposed of along with ordinary household waste, as electrical and electronic waste must be disposed of separately.
In accordance with the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste. Private households in the EU can take used equipment to special recycling stations free of charge. In certain member states, used apparatus can be returned to the dealer where they were bought on the condition you buy new products. Contact your retailer, distributor or the municipal authorities for further information on what to do with electrical and electronic waste.
GUARANTEE TERMS
The guarantee does not apply:
•if the above instructions are not followed
•if the appliance has been interfered with
•if the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage
•if faults have arisen because of faults in your electricity supply.
Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.
15