Exido 246-017 manual Important Safety Measures, Overview of Functions, Before USE, Use

UK

To get the best out of your new blender, please read these instructions carefully before using it for the first time. We also recommend that you save them in case you need them at a later point to remind yourself of the blender’s functions.

IMPORTANT SAFETY MEASURES

-Read the user instructions all the way through.

-Use the appliance for its intended pur- pose only.

-Never pull on the cord; to unplug from the socket, grasp the plug firmly and pull carefully.

-Keep the cord away from hot surfaces.

-Should the cord become damaged, it must be replaced at a workshop spe- cified by the manufacturer, as special tools are required.

-Should the appliance itself become da- maged, it must be taken to a specialist for repair. If the appliance is subjected to unauthorised repairs the guarantee will become void.

-Keep an eye on any children in the vicinity of the appliance when it is being used. The appliance should be kept out of the reach of children.

-For indoor use only.

-The blender is not for commercial use.

-WARNING: When mixing hot liquids/ foods excess pressure may build up inside the blender, and this could make the lid come off and the contents splash out.

We therefore recommend that you avoid mixing excessively hot foods and that you only put very small quantities of hot liquids or foods into the blender.

OVERVIEW OF FUNCTIONS:

1.Removable cap in lid

2.Lid with filling hole

3.Blender goblet

4.	Motor section	1.	2.
5.	Pulse function button
6.	Speed selector
	3.
			4.
	5.
	6.
BEFORE USE:

Before using for the first time, take the blender apart and wash the blender goblet, lid and blade section in mild detergent and dry them thoroughly. Do NOT immerse the motor section in any form of liquid!

USE:

1.Ensure that the knob is at “Off”.

2.Fit the blender goblet onto the motor section and turn it firmly clockwise.

3.Place the required ingredients carefully in the blender goblet.

4.Carefully attach the lid, and plug the blender in.

5.Start the blender by flipping the speed selector to the required position. “Lo”: Low speed

“Hi”: High speed

“Off”: Stop

The manual pulse function button can be pressed for maximum speed in shorter periods.

6.Once the ingredients have reached the desired consistency, flip the speed selector back to the “Off” position.

Do not remove the blender goblet from the motor section until the blacde has stopped rotating.

14