Exmark 312, 000 & higher manual Product Overview, Operation, Controls, Motion Control Levers

Operation

Product Overview

Figure 4

1.	Rollover Protection	5.	Fuel cap
	System (ROPS)
2.	Engine Controls (right	6.	Height of cut adjustment
	console)
3.	Seat belt	7.	Parking brake

4.Motion control levers

Operation

Note: Determine the left and right sides of the machine from the normal operating position.

Controls

Motion Control Levers

The motion control levers located on each side of the console control the forward and reverse motion of the machine.

Moving the levers forward or backward turns the wheel on the same side forward or reverse respectively. Wheel speed is proportional to the amount the lever is moved.

Moving the levers outward from the center position into the T-slot locks them in the neutral position (Figure 5).

When the motion control levers are in the neutral position, the LCD indicator appears in the message display on the RH console (see Figure 8).

Figure 5

1.	Neutral lock position	4.	Forward
	(handles out)
2.	Neutral operate position	5.	Neutral (operate)
	(handles in)
3.	Front of Unit	6.	Reverse

19