Manuals / Exmark / Lawn and Garden / Lawn Mower

Exmark 920 manual Electric Clutch Adjustment

Models: 920

1 64
Download 64 pages 37.72 Kb
Page 43
Image 43

Maintenance

14.Once step 11 is achieved, hold the threaded rod end with a tool and tighten the lock nut against the standard nut. Do Not allow the cable to turn when the nuts are tightened.

15.After adjusting the brakes on both sides of the mower, cycle the brake handle a minimum of six times to allow the cable to seat into the sheath and mounting tabs.

16.Readjust both brakes following the procedure in steps 10 through 14.

17.If a brake component has been removed or replaced, see the steps below; otherwise proceed to step 18.

Burnishing the Brake Procedure:

A.Clear the area of any flammable material before starting the burnishing process.

B.Rotate the drive wheel release handle to the “operating” position. Refer to the Drive Wheel Release Valves section in Operation.

C.Apply the park brake.

D.Install a 1/2 x 6 inch (approx.) rod or bolt through the 2 inch height of cut hole (see Figure 31).

WARNING

Engine must be running and drive wheels must be turning so adjustments can be performed. Contact with moving parts or hot surfaces may cause personal injury.

Keep fingers, hands, and clothing clear of rotating components and hot surfaces.

F.Release the park brake so the handle rests on the 1/2 x 6 inch rod or bolt.

G.Move the throttle to high idle.

H.Move both motion control levers to the full forward position and hold for 15 seconds.

I.Move both motion control levers to the full reverse position and hold for 15 seconds.

J.Turn off the engine and completely release the park brake by removing the 1/2 x 6 inch rod or bolt.

K.Allow the hubs to cool until they are cool enough to safely touch.

L.Rotate the drive wheel release handle to the “released” position. Refer to the Drive Wheel Release Valves section in Operation.

M.Readjust both brakes following the procedure in steps 10 through 14.

18.Rotate the drive wheel release handle to the “operating” position. Refer to the Drive Wheel Release Valves section in Operation.

19.Install the rear tires and torque lug nuts to 90-95 ft-lb (122-129 N-m).

20.Remove jack stands.

Figure 31

1.2 inch height of cut location

E.Start the mower while in the operator position.

Electric Clutch Adjustment

No adjustment necessary. However when the clutch brake has worn to the point where the clutch no longer engages consistently, the shim can be removed to extend the clutch life.

43

Page 42 Page 44
Page 43
Image 43
Exmark 920 manual Electric Clutch Adjustment
Page 42 Page 44

920 specifications

The Exmark 920 is an exceptional piece of equipment tailored for professionals and enthusiasts alike. Designed with an emphasis on performance and reliability, this mower embodies the pinnacle of lawn care technology. Known for its robust construction, the Exmark 920 is equipped with a powerful engine, ensuring efficient and effective mowing even in demanding conditions.

One of the standout features of the Exmark 920 is its cutting deck. With a 52-inch or 60-inch mower deck option, it allows users to cover a large mowing area quickly. The deck is crafted from high-strength steel, providing durability and longevity while maintaining a lightweight design that enhances maneuverability. Innovative blade design promotes superior airflow for an even cut, preventing clumping and ensuring a polished finish across various grass types.

The Exmark 920 utilizes advanced technology, including the innovative RED Technology, which enhances engine performance by optimizing power consumption. This results in reduced fuel consumption while maintaining the required power output for demanding tasks. Additionally, the mower’s intuitive controls include a user-friendly interface, allowing for easy adjustments and settings, catering to the varying needs of different lawn types and conditions.

Another notable feature of the Exmark 920 is its all-day comfort design. With an ergonomic seat and advanced suspension system, operators can tackle long mowing sessions without discomfort. The padded seat is adjustable, providing maximum support to minimize fatigue, while the suspension system absorbs bumps and uneven terrain for a smoother ride.

Furthermore, the Exmark 920 prioritizes serviceability. Easy access points for maintenance and a well-designed layout ensure that routine tasks, such as oil changes and blade replacements, can be completed efficiently. The model also comes equipped with LED headlights for improved visibility during early morning or late evening mowing.

In summary, the Exmark 920 is a sophisticated mower combining power, advanced technology, and design for comfort and utility. Its high-performance engine, durable cutting deck, user-friendly controls, and serviceable layout make it an ideal choice for anyone seeking to achieve a well-manicured lawn with professional results. Whether for commercial or residential use, the Exmark 920 stands out as a leading option in the market, enabling users to tackle any mowing challenge with confidence and ease.