USB PowerPlate 200 Series Installation Guide
The Extron® USB PowerPlate 200 Series are USB power charging products that provide power for electronic mobile devices (such as smartphones and tablets) from an external Extron power supply.
Each PowerPlate model has two USB Type A female connectors.
The PowerPlate 200 AC AAP adds a
Connectors
Power (12 V) — The included external power supply connects to the
USB Output — The two USB connectors can supply up to 2.1 A (shared between the connectors) at 5 volts (10.5 watts).
AC Pass Through (AC AAP only) — The AC
NOTE: USB PowerPlate 200 series products distribute power between the two USB connectors according to the requirements of each connected device. Large tablets and other devices can have high power requirements. When the maximum available power is reached, the connected device may notify that it is not charging while receiving a low charge.
Installation
Power (12 V) — You must connect the included external power supply to the
Connect the power supply wires as shown.
Smooth | Ridges |
| |
A | A |
| 3/16" |
| (5 mm) Max. |
SECTION
Power Supply
Output Cord
NOTES:
•This unit must be installed in accordance with the National Electrical Code and with all local codes.
•Ensure that the installation meets the local and state regulatory requirements, including building, electrical, and safety codes, and UL and ADA accessibility requirements.
Extron Headquarters | Extron Asia | Extron China | Extron Korea |
+1.800.633.9876 (Inside USA/Canada Only) | +65.6383.4400 | +86.21.3760.1568) | +82.2.3444.1571 |
|
|
|
|
Extron Europe | Extron Japan | Extron Middle East | Extron India |
+31.33.453.4040 | +81.3.3511.7655 | +971.4.299.1800 | +91.80.3055.3777 |
|
|
|
|
© 2013 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
