Setup Guide for AVTrac™ Demonstration Kit
The AVTrac Demonstration Kit shows how the AVTrac system meets customers' application needs. The kit components can be unpacked from the carrying box as shown in the figures below. To repack the kit, reverse the steps.
NThe illustrations below show the US version of the AVTrac Demonstration kit. The International and Universal models are similar in size and packaging, but contain a single AC outlet, which may be connected to double insulated power cable, or flex conduit without wires.
NIf the box is to be reused, remember to save the packing foam.
WThis kit is for demonstration
purposes only. The AC power module is not wired to distribute power and must not be connected to an electrical power source.
Carpet Pieces (2)
1.Remove carpet pieces.
2. | Remove top foam and foam |
| covering side ramps. |
Connectivity Box (1)
3.Remove side and end ramps.
End Ramps (2)
AC Conduit (1)
PRELIMINARY
4.Remove track pieces and connectivity box with AC conduit.
Side Ramps (2)
Carpet Finish
Cover Track (1)
Rubber finish Cover Track (1)
Base Track (1)
