Extron electronic FCMP 44 Fcmp 44 Installation Guide, contd, Specifications

FCMP 44 • Installation Guide, cont'd

Installation

Extron

FCMP 44

To install the FCMP 44 on a flat ceiling	Flat Ceiling Mounting
1. Locate a suitable wooden joist at the location chosen for the	Plate
		Extron
installation. Mark the position of the four corner mounting	Extron	UPB 25
holes (see figure 1). Each hole should be in the center of a	PMP	Universal Projector
		Mounting Bracket (optional)
joist (minimum size 2 inch by 4 inch). If the plate does not	Projector Mount
	Pole (optional)
span two joists, build up a suitable support, using 2 by 4 inch
minimum sized joists, ensuring each hole falls in the center
of a joist.		Security Lock
2. Drill pilot holes perpendicular to the joist. The pilot holes
should be 70% of shank diameter and the full depth of the
lag bolts to be used (1/4 inch diameter by 4 inch lag bolts are
recommended).
3. Using fasteners suitable for the mounting surface (not	Projector
supplied, see above for recommended type), firmly secure
the FCMP 44 to the joists. A minimum of four bolts, with

	washers, should be used.	Figure 4. Typical Application of FCMP 44
4.	Back out the set screws, and then screw a projector mounting

pole (with an NPT 1.5 inch thread, such as an Extron PMP) of suitable length into the mounting plate. A minimum of three turns is needed to safely secure the pole.

Be careful not to cross thread the pole into the mounting plate.

5.Secure the pole in position by tightening the set screws down.

6.Follow the instructions supplied with the projector mounting bracket to hang the bracket.

Specifications

Mount type	Pole Mount
Material	Metal
Plate dimensions	Various (see image)
Shipping weight	~ 2 lbs (1 kg)
Maximum capacity	200 lbs (91 kg)
Regulatory compliance
Safety	CE, c-UL, UL for use with UL Listed
	mount and projector;
	OSHPD anchorage pre-approval
Vibration	ISTA 1A in carton (International
	Safe Transit Association)
Warranty	3 years parts and labor

all dimensions in inches (millimeters)

4.00 [101.6]

2X .66 [16.6] 2X 2.690 [68.3]

4X .75 [19.0]

2X .50 [12.7] 4X .44 [11.2]

2.00 [50.8]

4.00 [101.6]

2X 3.000 [76.2]

2.220

[56.39]

(CUTOUT)

(1 1/2"-11.5 NPT)

2.00 [50.8]

Figure 3. FCMP 44 Dimensions

Extron Headquarters		Extron Asia	Extron China	Extron Korea
+1.800.633.9876 (Inside USA/Canada Only)		+65.6383.4400	+86.21.3760.1568)	+82.2.3444.1571
Extron Europe		Extron Japan	Extron Middle East	Extron India	68-1248-01
+31.33.453.4040		+81.3.3511.7655	+971.4.2991800	+91.80.3055.3777
					Rev B
2	© 2012 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
					08 12