Features
•Extends single link DVI-D, stereo audio, and RS-232 control signals very long distances over a single fiber
•Inputs: DVI-I connector with buffered input loop-through, unbalanced stereo audio on 3.5 mm stereo mini jack, and balanced/unbalanced stereo audio on captive screw connector - FOX 500 DVI Tx
•Outputs: DVI-I connector, unbalanced stereo audio on 3.5 mm stereo mini jack, and balanced stereo audio on captive screw connector - FOX 500 DVI Rx
•All digital, zero compression technology provides pixel-for-pixel performance with signals up to 1600x1200, including HDTV 1080p/60 — The FOX 500 DVI delivers uncompressed pixel-for-pixel transmission of video signals to ensure optimal image quality at resolutions up to UXGA (1600x1200), including HDTV 1080p/60.
•EDID emulation mode — The FOX 500 DVI transmitter provides a selector for specifying the rate of the incoming DVI signal. EDID emulation mode allows proper operation when no local monitor is present.
•Buffered DVI input loop-through — A buffered DVI input loop-through on the FOX 500 DVI transmitter provides an output signal to drive a local monitor.
•Industry standard LC connectors provide reliable physical connectivity and precise fiber core alignment
•Alarm notification for fiber link loss — The FOX 500 DVI can be set up to trigger an external control system for immediate notification when a fiber link has been lost. Requires second fiber link.
•850 nm multimode and 1310 nm singlemode models available
•Second fiber link enables bi-directional RS-232 pass-through, control from either location, and real-time system monitoring
•Dual stereo audio outputs
•30 user memory presets — When paired with the FOX 500 transmitter for sending analog RGB signals, these presets on the FOX 500 DVI receiver are available for saving and recall of size, position, and detail information for multiple incoming sources. The ability to save and recall presets is useful in switcher-based environments.
•Active PC audio to balanced audio interfacing
•Audio gain & attenuation adjustment and muting capability
•RS-232 serial control at transmitter and receiver — The FOX 500 DVI transmitter and receiver feature front and rear panel RS-232 serial ports for control and configuration. The second fiber link allows for control of both units at either location, as well as remote verification of fiber link status and the presence of input DVI and audio signals.
•Internal test patterns for calibration and setup — Three test patterns are available, including grayscale, color bars, and alternating pixels.
•Auto-Image™automatically optimizes output — When paired with the FOX 500 transmitter for sending analog RGB signals, a press of a button on the FOX 500 DVI receiver automatically adjusts the sizing, centering, and filtering to optimize the output image. This can save time and effort in fine tuning displayed images. Requires second fiber link.
•Real-time status LED indicators for troubleshooting and monitoring — LEDs on the transmitter and receiver front panels verify the presence of DVI and audio signals at the transmitter as well as active fiber links between the units. Requires second fiber link.
•Front panel security lockout — This feature locks out all front panel functions; all functions however, are available through RS-232 control.
•Compatible with FOX 500 transmitter and receiver and FOX 500 DA6 transmitter/distribution amplifier — Enables ultra-long distance DVI-to-analog RGB and analog RGB-to-DVI conversion without the need for extra signal conversion devices.
•Rack-mountable 1U, half rack width metal enclosures
•Internal international power supply — The 100-240VAC, 50/60 Hz, universal power supply provides worldwide power compatibility.
DESCRIPTION
The Extron FOX 500 DVI Fiber Optic Extender is a transmitter and receiver set for long haul transmission of DVI, audio, and RS-232 control signals over a single fiber. Engineered for reliability and exceptional high resolution image performance, it uses Extron's exclusive all digital, zero compression technology to deliver perfect pixel-for-pixel transmission of computer- video images up to UXGA (1600x1200) resolution, including HDTV 1080p/60. Designed specifically for A/V systems, the FOX 500 DVI also includes a host of integrator-friendly features such as an EDID emulation mode, buffered input loop-through, RS-232 control from multiple locations, rack-mount capability, and real-time system monitoring.
The FOX 500 DVI is ideal for a wide range of applications requiring long distance transmission of high resolution content with the highest quality. Because transmission of content is inherently secure and immune to outside interference, fiber applications are favored in government, military, and medical environments. The FOX 500 DVI transmitter and receiver feature industry standard LC-type connectivity.
The FOX 500 DVI MM supports multimode fiber at 850 nm, which is typically used within buildings or facilities with moderate-range transmission distances up to 150 meters (492 feet). The FOX 500 DVI SM supports singlemode as well as multimode fiber at 1310 nm. Singlemode fiber offers long-range transmission capability over extreme distances of up to 30 km (18.75 miles). It is used in very large facilities such as airports and stadiums, and for connecting over very long distances between facilities such as university campuses.
For convenient integration into A/V systems, the FOX 500 DVI transmitter accepts and digitizes unbalanced or balanced stereo audio and RS-232 control signals, and transmits them along with the DVI-D signals. The transmitter also includes a buffered input loop-through for viewing
DVI video on a local monitor. An EDID emulation mode ensures proper communication with the DVI source when no local monitor is present.
