Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Advanced Configuration
Input sync detection
View input sync detection E1LS}xxx.x,xxx.x]Shows horizontal frequency in kHz
and vertical frequency in Hz.
000.0,000.0 if no signal.
Input video format (VGA only)
Set input video format 1*X1%\ Typ 1*X1%] Sets input 1 to format X1%.
View input video format 1\ X1%] View video format of input 1.
Plus mode transmission
Disable Plus mode
transmission
81*0# Plus0]Disable Plus mode transmission.
Enable Plus mode
transmission
81*1# Plus1]Enable Plus mode transmission
(default).
View Plus mode
transmission
81# X%] View Plus mode transmission
setting.
HDCP authorized device (HDMI input only)
HDCP authorized device on EE2*1HDCP}HdcpE2*1]HDCP authorized device on for
input 2 (default).
HDCP authorized device off EE2*0HDCP}HdcpE2*0]HDCP authorization off for input 2.
Query HDCP authorized
device status
EE2HDCP} X^] View the HDCP authorization
status.
HDCP status (HDMI input only)
Query HDCP status EI2HDCP} X1#] Query the HDCP status of the
current input.
NOTE: X% = Enable or disable 0 = off or disabled
1 = on or enabled
X^ = HDCP authorization 0 = HDCP authorization off
1 = HDCP authorization on (default)
X1# = HDCP status 0 = no source detected
1 = source detected with HDCP
2 = source detected but no HDCP is present
X1% = Input video format 0 = auto detect (default)
1 = RGB (full range)
2 = YUV
FOX T UWP 302 Wallplate Transmitter • SIS Configuration and Control 18