Extron electronic HSA 200S Series specifications 146

Hideaway ® Surface Access Enclosures

Hideaway® HSA 200S Series

Hideaway® HSA 200C Series Accessories

Routing Templates	Model DESCRIPTION		page	PART #
HSA 200/222 and Cable Cubby 300S/300C
Routing Template: US Template	HSA 200/222 US Routing Template		n/a	70-237-01
HSA 200/222 Routing Template	HSA 200/222 International Routing Template		n/a	70-237-02
Optional Accessories	Model DESCRIPTION		page	PART #
HSA 200 RJ-11 Cable Kit	For HSA - Hideaway Surface Access Enclosures - HSA 200 Kit		n/a	70-231-01
Flexible Conduit Adapter Kit For HSA 200/222	Installation Kit for Hard Wired Electrical Environments - HSA 200/222		page 140	70-229-01
SPECIFICATIONS		General

Video — HSA 200SE

Gain.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selectable: unity (0.7 V), (0.75 V) 50%, (0.8 V) 100% Bandwidth.. . . . . . . . . . . . . . . . . . . . . . . . 300 MHz (-3 dB)

NOTE: ID bits are terminated on pins 4 and 11.

Video input — HSA 200S

Number / Signal type. . . . . . . . . . . 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs

Connectors.. . . . . . . . . . . . . . . . . . . . . . . (1) 15-pin HD female

Video input — HSA 200SE

Number / Signal type. . . . . . . . . . . 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs

Connectors.. . . . . . . . . . . . . . . . . . . . . . . (1) 15-pin HD female

Nominal level.. . . . . . . . . . . . . . . . . . . . 0.7 Vp-p for RGB

Minimum / Maximum levels. . . Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain Impedance. . . . . . . . . . . . . . . . . . . . . . . . 75 ohms

Horizontal frequency. . . . . . . . . . . . 15 kHz to 135 kHz

Vertical frequency. . . . . . . . . . . . . . . 30 Hz to 170 Hz

Video output — HSA 200S

Number / Signal type. . . . . . . . . . . 1 pass-through VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs Connectors.. . . . . . . . . . . . . . . . . . . . . . . 5 BNC female on pigtails

Video output — HSA 200SE

Number / Signal type. . . . . . . . . . . 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs

Connectors.. . . . . . . . . . . . . . . . . . . . . . . 5 BNC female on pigtails

Nominal level.. . . . . . . . . . . . . . . . . . . . 0.7 Vp-p for RGB

Minimum / Maximum levels. . . Analog: 0.3 V to 1.5 Vp-p

Impedance. . . . . . . . . . . . . . . . . . . . . . . . 75 ohms

DC offset.. . . . . . . . . . . . . . . . . . . . . . . . . . ±5 mV with input at 0 offset

NOTE: Output resolution may vary depending on whether or not the Extender is attached to the computer at startup, and also on the type of computer being used.

Sync — HSA 200SE

Input type	RGBHV, RGBS, RGsB, RsGsBs
Output type	RGBHV, RGBS, RGsB, RsGsBs
Input level	2.0 V to 5.0 Vp-p
Output level	TTL: 5.0 Vp-p, unterminated
Input impedance	510 ohms
Output impedance	75 ohms
Max. propagation delay	18.8 ns
Max. Rise / Fall time	4 ns
Polarity	Positive or negative (follows input)

Audio — HSA 200SE

Gain.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unbalanced output: 0 dB; balanced output: +6 dB Frequency response.. . . . . . . . . . . . 20 Hz to 20 kHz, ±0.5 dB

THD + Noise. . . . . . . . . . . . . . . . . . . . . . 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level S/N.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >90 dB at rated maximum output (21 dB, balanced) Stereo channel separation.. . . . >75 dB @ 20 Hz to 20 kHz

Audio input — HSA 200S

Number / Signal type. . . . . . . . . . . 1 stereo, unbalanced

Connectors.. . . . . . . . . . . . . . . . . . . . . . . (1) 3.5 mm stereo female jack

Audio input — HSA 200SE

Number / Signal type. . . . . . . . . . . 1 stereo, unbalanced

Connectors.. . . . . . . . . . . . . . . . . . . . . . . (1) 3.5 mm stereo female jack

Impedance. . . . . . . . . . . . . . . . . . . . . . . . >10k ohms unbalanced, DC coupled

Nominal level.. . . . . . . . . . . . . . . . . . . . -10 dBV (316 mVrms)

Maximum level.. . . . . . . . . . . . . . . . . . +6 dBu, (balanced or unbalanced) at 1% THD+N

NOTE: 0 dBu = 0.775 Vrms. 0 dBV = 1 Vrms. 0 dBV ≈ 2 dBu.

Audio output — HSA 200S

Number / Signal type	1 pass-through stereo, unbalanced
Connectors	(1) 3.5 mm, direct insertion captive screw connector, 3 pole
Audio output — HSA 200SE
Number / Signal type	1 stereo, balanced/unbalanced
Connectors	(1) 3.5 mm direct insertion captive screw connector, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Nominal level	Unbalanced output: -10 dBV (316 mVrms)
	Balanced output: -2 dBu (632 mVrms)
Maximum level (Hi-Z)	>+14 dBu, balanced at 1% THD+N
Maximum level (600 ohm)	>+5.5 dBm, balanced at 1% THD+N

Power (HSA 200SE)	Supplied by an external power supply
	External power supply: 100 VAC to 240 VAC, 50/60 Hz, external,
	autoswitchable; to 12 VDC, 0.42 A, regulated
	Power input requirements: 12 VDC, 0.2 A

Temperature / Humidity

(HSA 200SE). . . . . . . . . . . . . . . . . . . . . . . Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +3° to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Rack mount.. . . . . . . . . . . . . . . . . . . . . . No, but furniture mountable

Enclosure type.. . . . . . . . . . . . . . . . . . . Metal

Enclosure dimensions

CAUTION: Use the appropriate metal Extron routing template or refer to the surface cutout dimensions here before cutting a hole in the furniture or other surface. Pay special attention to the direction the unit will face; the unit’s connector access side is underlined. Extron is not responsible for miscut mounting holes.

USA models

Top plate (outer rim).. . . . . . . . . . . . . . 6.470" W x 5.125" D (16.43 cm W x 13.02 cm D) Surface cutout (inside rim).. . . . . . . 5.970 ±0.0325" W x 4.625 ±0.0325" D

(15.16 ±0.083 cm W x 11.75 ±0.083 cm D)

Top plate (inside tilt plate).. . . . . . . . 4.344" W x 3.000" D (11.03 cm W x 7.62 cm D) Box (under surface).. . . . . . . . . . . . . . . 4.0" H x 4.6" W (front of unit) x 4.4" D

(10.2 cm H x 11.7 cm W x 11.2 cm D) without clamps 4.0" H x 8.0" W (front of unit) x 4.4" D

(10.2 cm H x 20.3 cm W x 11.2 cm D) with clamps

International models

Top plate (outer rim).. . . . . . . . . . . . . . 8.183" W x 6.375" D (20.79 cm W x 16.19 cm D) Surface cutout (inside rim).. . . . . . . 7.683 ±0.0325" W x 5.875 ±0.0325" D

(19.51 ±0.083 cm W x 14.92 ±0.083 cm D)

Top plate (inside tilt plate).. . . . . . . . 5.90" W x 4.10" D (14.99 cm W x 10.41 cm D) Box (under surface).. . . . . . . . . . . . . . . 4.0" H x 6.3" W (front of unit) x 5.0" D

(10.2 cm H x 15.9 cm W x 12.7 cm D) without clamps 4.0" H x 10.0" W (front of unit) x 5.0" D

(10.2 cm H x 25.3 cm W x 12.7 cm D) with clamps

Product weight

HSA 200S. . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 lbs (1.8 kg)

HSA 200SE.. . . . . . . . . . . . . . . . . . . . . . . . 5.0 lbs (2.3 kg)

Shipping weight

HSA 200S. . . . . . . . . . . . . . . . . . . . . . . . . . 7 lbs (4 kg)

HSA 200SE.. . . . . . . . . . . . . . . . . . . . . . . . 8 lbs (4 kg)

Vibration.. . . . . . . . . . . . . . . . . . . . . . . . . . ISTA 1A in carton (International Safe Transit Association) Listings, certification.. . . . . . . . . . . UL, CUL, CSA C/US

Compliances

HSA 200SE.. . . . . . . . . . . . . . . . . . . . . . . . CE, FCC Class A, VCCI, AS/NZS, ICES

MTBF.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30,000 hours

Warranty.. . . . . . . . . . . . . . . . . . . . . . . . . . 3 years parts and labor

NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.

146

USA West	USA East	www.extron.com
+1.714.491.1500 / +800.633.9876	+1.919.863.1794 / +800.633.9876	© 2008 Extron Electronics. All rights reserved.
+1.714.491.1517 FAX	+1.919.863.1797 FAX	Pricing and specifications may change without notice.