IN1606 and IN1608 Series Scaling Presentation Switcher • Reference Information 100
Reference
Information
This section provides reference or supplemental information. Topics in this section include:
• Mounting
• Downloading Updated Firmware
Mounting
Tabletop Mounting
Attach the provided rubber feet to the bottom four corners of the enclosure.
Rack Mounting
The scalers can be mounted into racks with the pre-installed rack ears (see UL Guidelines
for rack mounted devices on page 101). To install the device, line up the screw holes on
the rack ears on both side of the device with the screw holes in the rack so they device is
level. Use the provided screws to attach the device to the rack.
Rack Ears
Rack Mounting
Rack Ears
Figure 64. 1U Rack Mounting Figure 65. 2U Rack Mounting