10 IPL T Series • Setup
e LINK LED — A green LED
lights to indicate that the
unit is connected to an
active network.
f ACT LED — A yellow LED
lights to indicate that data
is being sent or received.
IPL T SFI244
IPL T SFI244
1
R
100
COM
TX
LINK
ACT
2
RX 1 3
2 4
1 3
2 4
I/O IR 7
8
9
13
24 5 6
a Power LED — A green LED lights to indicate that the unit is
receiving power.
b Reset button — Recessed multiple function Reset button. See
Resetting the Controller for more information.
c IR learning receiver — This infrared receiver "learns"commands
from device IR remote controls. Refer to the IR Learner Software
Help file for IR learning procedures.
d COM LEDs
zz TX — A green LED lights to indicate that data is being
transmitted.
zz RX — A green LED lights to indicate that data is being
received.
e I/O LEDs — A green LED lights to indicate that an I/O port
(1 through 4) is active.
f IR LEDs — A green LED lights to indicate that an IR port
(1 through 4) is transmitting data.
g 100 LED — A green LED lights to indicate that the connection
speed is 100 Mbps. If the LED is not lit, the connection speed is
10 Mbps.
h LINK LED — A green LED lights to indicate that the unit is
connected to an active network.
i ACT LED — A yellow LED lights to indicate that data is being sent
or received.
IPL T S6
R
100
LINK
ACT
1
COM
TX
2
RX
RTS
CTS
3
COM
TX
4
5
6
RX
TX
RX
132
3
3
4
5
6