Installation and Operation, cont’d
Front Panel Features
| 1 | 2 | 3 |
|
| MTP SERIES | |
1 | 12 | 3 | 4 |
Figure 4 — MIX 301 front panel
1Power LED — Lights green to indicate that the MIX 301 has power.
2 3 4 Input channel audio gain controls — Adjusts the audio
input gain for each input. The gain is adjusted by rotating the screw and the adjustment range is from mute (fully counterclockwise) to +20 dB (fully clockwise). See the note below.
Unity gain (0 dB) for each input channel is around the 12 o’clock (vertical) position with the potentiometer adjustment screws vertically aligned with the indicator dots, as shown here:
1 2 3
The potentiometers of the MIX 301 are set precisely to unity gain at the factory. Once an adjustment screw is turned, test equipment will be required to accurately reset the potentiometer to unity gain.
Reference Information
Specifications
Audio
Gain | Adjustable per input. When all three gain |
| potentiometers are set to 12 o’clock, the |
| gain is as follows: |
| Unbalanced output: |
| Balanced output: 0 dB |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.05% @ 1 kHz at nominal level |
S/N | >90 dB, balanced, at maximum output |
| (unweighted) |
CMRR | >70 dB @ 60 Hz to 20 kHz |
Audio input
Number/signal type | 3 mono, balanced/unbalanced | |
Connectors | (3) 3.5 mm captive screw connectors, | |
|
| 3 pole |
Impedance | >10k ohms unbalanced, DC coupled | |
Nominal level | ||
|
| Vrms) |
Maximum level | >+18 dBV, (balanced or unbalanced) at 1% | |
|
| THD+N |
Input gain adjustment | Mute to +20 dB, adjustable per input | |
| 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu | |
|
Audio output
Number/signal type | 1 mono, balanced/unbalanced |
Connectors | (1) 3.5 mm captive screw connector, 3 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Nominal level | |
| +4 dBu (1.23 Vrms) balanced, adjustable |
Maximum level | +25 dBu, balanced with 100k ohm load at |
| 1% THD+N |
| +18 dBm balanced with 600 ohm load at |
| 1% THD+N |
General
External power supply | 100 VAC to 240 VAC, 50/60 Hz, external, |
| autoswitchable; to 12 VDC, 1 A, regulated |
Power input requirements | 12 VDC, 0.2 A (max.) |
8 | MIX 301 • Installation and Operation | MIX 301 • Reference Information | 9 |