![Specifications — MLC 226 Series, cont’d](/images/new-backgrounds/114207/1142073x1.webp)
Specifications — MLC 226 Series, cont’d
Control — serial ports
Display control port | (1) | 3.5 mm direct insertion captive screw connector, 3 pole, programmable |
| for bidirectional | |
| up to 1 MHz | |
Switcher control port | (1) | 3.5 mm direct insertion captive screw connector, 3 pole, for bidirectional |
Baud rate and protocol
Control— IR/serial ports
IR/serial control ports | (3) 3.5 mm direct insertion captive screw connectors, 2 pole |
| Programmable: unidirectional |
| infrared control up to 1 MHz |
Baud rate and protocol | 115200 to 300 baud (9600 baud = default) ; 8 (default) or 7 data bits; |
| 1(default) or 2 stop bits; no parity (default), or even or odd parity |
Digital I/O control
Number/type | 1 digital input/output (configurable), 1 digital input |
Connector | 1 rear panel |
| (1) 3.5 mm direct insertion captive screw connector (shared with power |
| sense port) |
Pin configuration | |
| power sense = digital in, GND = GND |
Digital inputs |
|
Input voltage range | |
Input impedance | 28k ohms |
Programmable pullup | 2k ohms to +5 VDC |
Threshold low to high | >2.8 VDC |
Threshold high to low | <2.0VDC |
Digital output | 250 mA sink from 24 VDC, maximum |
General
External power supply | 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 1 A, regulated |
Power input requirements |
|
MLC 226 IP DV+ | 12 VDC, 0.515 A (includes MLC 226 IP and |
All other models | 12 VDC, 0.495 A (0.515 A with 1 |
NAn MLC 226 Series controller must be powered by its own power supply. It cannot be powered by an MLS switcher.
Temperature/humidity | Storage: |
| Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling | Convection, unvented |
Rack mount |
|
MLC 226 IP DV+ | No, but wall- and |
All other models | Yes, with optional rack mounting kits, and also wall- and furniture- |
| mountable with optional mounting kits |
Enclosure type |
|
MLC 226 IP controller only. No faceplate, metal rear enclosure
MLC 226 IP, MLC 226 IP DV+
MLC 226 IP with RAL9010 white faceplate, MLC 226 IP AAP, MLC 226 IP L
Metal faceplate, metal rear enclosure