Specifications — MLP 101, MLP 101 AAP, MLP 101 D
Audio
Gain | Adjustable, +25 dB to + 72 dB |
Frequency response | 20 Hz to 20 kHz, ±0.1 dB |
THD + Noise (with a 10 Hz to 80 kHz bandwidth filter) | |
| 0.03% when input is |
| 0.14% when input is |
S/N | 92 dB at maximum output (unweighted, with a 10 Hz to 80 kHz bandwidth filter) |
CMRR | >70 dB @ 20 Hz to 20 kHz |
Low cut filter | 75 Hz (18 dB per octave) |
Equivalent input noise | <126 dBV (unweighted, with a 10 Hz to 80 kHz bandwidth filter) |
Audio input
Number/signal type | 1 mono, balanced | |
Connectors |
| |
MLP 101 | (1) 3.5 mm captive screw connector, 3 pole | |
MLP 101 AAP, MLP 101 D | 1 female | |
Impedance | 2k ohm balanced | |
Nominal level | ||
Maximum level | ||
| 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu | |
| ||
|
|
|
Audio output
Number/signal type | 1 mono, balanced |
Connectors | (1) 3.5 mm captive screw connector, 3 pole |
Impedance | <150 ohms balanced |
Maximum level | >+25 dBu, balanced at 1% THD+N |
Maximum level (600 ohm) | >+20 dBu, balanced at 1% THD+N |
Control/remote — preamp
Contact closure | (1) 3.5 mm captive screw connector, 3 pole |
Contact closure pin configurations | 1 = +10 VDC, 2 = volume/mute (variable voltage), 3 = GND |
Volume control voltage range ... | 0 V (mute) to 10 V (maximum volume) |
Extron remote key pad control .. | (1) 3.5 mm captive screw connector, 3 pole |
General
External power supply | 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 1 A, regulated |
Power input requirements | 12 VDC, 0.3 A |
Temperature/humidity | Storage: |
| Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling | Convection, unvented |
Rack mount |
|
MLP 101 | Yes, with optional 1U, 9.5" deep rack shelf, part |
| (RSB 129); or VersaTools® 1U, 3.5" deep rack shelf, part |
| |
| (MBB 100) |
| |
| part |
| Projector mountable with optional kit PMK 100, part |
MLP 101 AAP | Yes, with optional faceplate or frame |
MLP 101 D | No, but wall or furniture mountable in a Decora |
Enclosure type | Metal |