VersaTools® MTP 15HD A Series • InstallationVersaTools® MTP 15HD A Series • Installation
VersaTools® MTP 15HD A Series, cont’d

VersaTools® MTP 15HD A Series • Specifications

Nominal level............................... 1 V p-p for Y of component video and
S-video, and for composite video
0.7 V p-p for RGB and for R-Y and B-Y of
component video
0.3 V p-p for C of S-video
Minimum/maximum levels ...... 0.3 V to 1.45 V p-p
Impedance .................................... 75 ohms
Return loss.................................... <-30 dB @ 5 MHz
DC offset (max. allowable)......... ±35 mV with input at 0 offset
Sync
Input type (transmitters)............ RGBHV, RGBS, RGsB, RsGsBs
Output type (receivers)............... RGBHV, RGBS, RGsB, RsGsBs
Standards...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level (transmitter) ............. 3.5 V to 5.5 V p-p, unterminated
Output level (receivers).............. 4.0 V to 5.0 V p-p, unterminated
Input impedance (transmitter) .. 573 ohms ±5%
Output impedance (receivers)... 110 ohms
Max. input voltage (transmitter) 5.5 V p-p
Polarity
Transmitter ....................... Positive or negative
(follows input polarity)
Receivers........................... Positive or negative (switch-selectable)
Audio
Number/signal type ................... 1 set of proprietary analog signals
Connectors.................................... 1 female RJ-45
Gain ............................................... Unbalanced output: 0 dB;
balanced output: +6 dB
Frequency response..................... 20 Hz to 20 kHz, ±1 dB
THD + Noise ................................ 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal
level
S/N ................................................ >70 dB at maximum output (unweighted)
CMRR............................................ >43 dB @ 20 Hz to 20 kHz
Audio input — transmitters
Number/signal type ................... 1 stereo, unbalanced
Connectors.................................... (1) 3.5 mm mini stereo jack
Impedance .................................... >10k ohms, unbalanced
Nominal level............................... +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level............................ +18 dBu, (unbalanced) at 1%THD+N

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

24

Audio output — receivers
Number/signal type................... 2 mono, balanced/unbalanced
Connectors.................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Nominal level............................... +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level ............................ +18 dBu, unbalanced at 1% THD+N
General
External power supply ............... 100 VAC to 240 VAC, 50/60 Hz, external;
to 12 VDC, 2 A, regulated
Power input requirements ......... 12 VDC, 0.5 A
Temperature/humidity.............. Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling.......................................... Convection, unvented
Rack mount................................... Yes, with optional 1U rack shelf, part
#60-190-01 (RSU 129) or 60-604-02
(RSB 129); or with 1U, 6" deep rack shelf,
part #60-190-10 (RSU 126) or 60-604-11
(RSB 126); or with VersaTools® 1U, 3" rack
shelf, part #60-190-20 (RSU 123) or
60-604-21 (RSB 123). Also furniture
mountable with optional Mini Under-
Desk Mounting Kit, part #70-212-01; or
projector mountable with optional
projector mounting kit, part #70-217-01.
Enclosure type.............................. Metal
Enclosure dimensions................. 1.7" H x 4.3" W x 3.0" D
(1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight............................. 0.4 lbs (0.2 kg)
Shipping weight........................... 2 lbs (1 kg)
Vibration....................................... ISTA 1A in carton
(International Safe Transit Association)
Listings.......................................... UL, CUL
Compliances................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF............................................. 30,000 hours
Warranty....................................... 3 years parts and labor

All nominal levels are at ±10%.

Specifications are subject to change without notice.

25VersaTools® MTP 15HD A Series • Specifications