Extron electronic MVX Plus 128 VGA A

4-7

MVX Plus 128 VGA A Matrix Switcher • Programmer’s Guide

PRELIMINARY

Command/Response Table for SIS™ Commands

Symbol deﬁnitions

] = CR/LF (carriage return/line feed) (hex 0D 0A)

} = Carriage return (no line feed, hex 0D)

(use the pipe character, |, instead for Web browser commands)

• = Space character

| = Pipe (vertical bar) character

E = Escape key (hex 1B)

(use W instead of Esc for Web browsers)

X! = Input number 01 – 12

X@ = Input number (for tie)

00 – 12 (00 = untied)

X# = Output number 01 – 08

X$ = Numeric dB value –18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)

X% = Audio gain 0 – 24 (1 dB/step)

X^ = Audio attenuation 1 – 18 (1 dB/step)

X& = Volume adjustment range 0 – 64 (1 dB/step except for 0-to-1, which is 22 dB)

(default = 64 [0 dB])

See the table on page 4-10.

X* = Room # (for room presets) 10 max. (each can have up to 10 presets (X1@s) assigned)

N A Room is a subset of operator-selected outputs that relate to each other. The MVX Plus switchers support up to 10 rooms, each of which

can consist of from 1 to 16 outputs.

X( = Mute, Lock mode, power supply 0 = off/mode 0/not OK

1 = on/mode 1/OK

2 = mode 2

X1) = Group # (for I/O grouping) 1 through 4 groups (0 = no group)

X1! = Global preset # 00 - 32 maximum (0 = current conﬁguration)

X1@ = Room preset # 10 maximum (0 = current conﬁguration for room)

N A Room preset is a stored conﬁguration with all of the outputs assigned to a single room. When a room preset is retrieved from memory,

it becomes the current conﬁguration.

X1# = RGB delay interval Delay in ½ second increments (10 maximum)

X1$ = Video/audio mute: 0 = no mutes

1 = video mute

2 = audio mute

3 = video and audio mute

X1% = Sync frequency xxx.xx (frequency in Hz (V) or kHz (H))

X1^ = Connection status 0 = no input connected

1 = input connected

X1& = Number of inputs 12

X1* = Number of outputs 8

X1( = Part number 68-788-01

X2) = Firmware version number to second decimal place (x.xx)

X2! = Verbose ﬁrmware version-description-upload date/time.

See the Query ﬁrmware version (verbose) command on page 4-16.

X2@ = Name 12 characters maximum for input names, output names, global preset

names, and room preset names

11 characters maximum for room names

Upper- and lower-case alphanumeric characters and

_ / and spaces are valid.

N The following characters are invalid in the name: {space} ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.

X2# = Voltage Positive or negative voltage and magnitude

X2$ = Temperature Degrees Fahrenheit