Programmer’s Guide, cont’d
MVX Plus 128 VGA A Matrix Switcher • Programmer’s Guide
4-18
PRELIMINARY
Command/response table for IP SIS commands
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
IP setup commands
Set matrix name EX3)CN}Ipn•X3)]
Read matrix name (location ECN} X3)]
Reset matrix name to
factory default
E•CN}Ipn•X3)]
Set time and date EX3@CT}IptX3@]
Read time and date ECT} X3#]
Set GMT offset EX3$CZ}IpzX3$] In the command, the divider
between hours and minutes
can be either a colon or a
period. In the response, the
divider is a colon.
Example: E8.0CZ}Ipz+08:00]
Set Daylight Savings Time EX3%CX} X3%]
Read Daylight Savings Time ECX} X3%]
Set IP address EX3^CI}IpiX3^]
Read IP address ECI} X3^]
Read hardware address ECH} X3&]
Read # of open connections ECC} X3*]
Set subnet mask EX3^CS}IpsX3^]
Read subnet mask ECS} X3^]
Set gateway IP address EX3^CG}IpgX3^]
Read gateway IP address ECG} X3^]
Set administrator password EX3(CA}Ipa•X3(]
Read administrator
password ECA} X3(]
Reset (clear) administrator
password E•CA}Ipa•]
Set user password EX3(CU}Ipu•X3(]
Read user password ECU} X3(]
Reset (clear) user password E•CU}Ipu•]
Set mail server,
domainname EX3^,X4),X3(CM}IpmX3^,X4),X3(]
Read mail server,
domainname ECM}X3^,X4),X3(]
Set e-mail recipient EX4!,X4@CR}IprX4!,X4@,]This command sets the
recipient. To receive e-mail
notifications, you must then
set the events that the switcher
reports, using one or more
separate Set e-mail events (EM)
commands (see next page).
Example: E72,Jsmith@folklore.netCR}
Ipr72,Jsmith@folklore.net,]
Read e-mail recipient EX4!CR}X4@,]