4-19
MVX Plus 128 VGA A Matrix Switcher • Programmer’s Guide
PRELIMINARY
Command/response table for IP SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
IP setup commands (continued)
Set e-mail events for
recipient
EX4!,X4#,X4$,X4$, ... X4$Em}You must first have set
an e-mail recipient for the
e-mail account number
(X4!), using the separate
Set e-mail recipient (CR)
command.
X4#,X4$]
Example: E72,3,1,2,8,17EM}See below E-mail account #72, JSmith,
will receive fail/missing and
fixed/restored messages for
inputs signals 1, 2, and 8 and
the power supply.
Response description: Notify when?, inputs 1 - 16 (13 through 16 not present on this model) PS]
Response:
Notify failed and fixed
3, 1 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 1
01 Input: 02 03 04 05 06 07 08 09 10 11 12 1314 15 16 Power Supply
E-mail input 8 status
Inputs not present
Read e-mail events for
recipients
E72EM} X4$,X4$,X4$, ... ,X4$]
Set DHCP on or off EX4^DH}IdhX4^]
Read DHCP on/off status EDH} X4^]
Set serial port parameters EX4&*X4*,X4(,X5),X5!CP}
CpnX4&•CcpX4*,X4(,X5),X5!]
Read serial port parameters EX4&CP}X4*,X4(,X5),X5!]
Set mode EX4&*X5@CY}CpnX4&•CtyX5@]
Read mode EX4&CY} X5@]
Set verbose mode EX5#CV}VrbX5#]
Read verbose mode ECV} X5#]
Commit RAM to flash
memory
E1FF}NvrX5$]
Check RAM EFF} X5$]
Special Characters
The HTML language reserves certain characters for specific functions. The switcher
does not accept these characters as part of preset names, the switcher’s name,
passwords, or locally created file names.
The switcher rejects the following characters:
{space (spaces are ok for names)} + ~ , @ = ‘ [ ] { } < > ’ “ semicolon (;)
colon (:) | \ and ?.