Extron electronic P/2 DA specifications, Video input, Video output, Sync, General, Model

specifications

VIDEO

Gain
P/2 DA4/6 xi	0 dB or +3 dB (when input is 0.7 Vp-p, output is
	0.7	V or 1.0 V), switchable
P/2 DA8/12 Series	Unity
Bandwidth	350	MHz (-3 dB), fully loaded

Video input

Number/signal type	1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV
	component video, S-video, composite video
Nominal level	1.0 Vp-p for Y of component video and S-video,
	and for composite video
	0.7 Vp-p for RGB and for R-Y and B-Y of
	component video
	0.3 Vp-p for C of S-video
Minimum/maximum levels	Analog: 0.3 V to 1.5 Vp-p with no offset at unity
	gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 135 kHz
Vertical frequency	30 Hz to 150 Hz
Return loss	<-40 dB @ 5 MHz
Input coupling	DC

Video output

Number/signal type	4, 6, 8, or 12 (depending on model) VGA-QXGA
	RGBHV, RGBS, RGsB, RsGsBs, HDTV component
	video, S-video, composite video (follows input
	type)
Connectors	4, 6, 8, or 12 female 15-pin HD
Nominal level	1.0	Vp-p for Y of component video and S-video,
	and for composite video
	0.7	Vp-p for RGB and for R-Y and B-Y of
	component video
	0.3	Vp-p for C of S-video
Minimum/maximum levels	0.3	V to 1.5 Vp-p (follows input)
Return loss	<-40 dB @ 5 MHz
DC offset	±5 mV with input at 0 offset

Sync

Input type	RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level
Output type	sync
P/2 DA4/6 xi	RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level
	sync (follows input)
P/2 DA8/12 Series	RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level
	sync (follows input)
	Tri-level on Y, R-Y, B-Y channels (component video
	720p, 1080i, 1080p)
	Bi-level on Y channel (for all other component
	video rates)
Input level	2.0 V to 5.0 Vp-p
Output level
P/2 DA4/6 xi	TTL: 5.0 Vp-p, unterminated
P/2 DA8/12 Series	0.3 Vp-p for component video (bi-level sync)
	0.6 Vp-p for component video (tri-level sync)
Input impedance	TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS
P/2 DA4/6 xi	510 ohms
P/2 DA8/12 Series	10k ohms or 510 ohms (default), selectable
Output impedance
P/2 DA4/6 xi	50 ohms
P/2 DA8/12 Series	50 ohms (default) or 75 ohms, selectable
Max. propagation delay
P/2 DA4/6 xi	60 ns
P/2 DA8/12 Series	>90 ns
Max. rise/fall time	2 ns
Polarity	Positive or negative (follows input)

Audio — P/2 DA8 A, P/2 DA12 A

Gain	Unbal. output: 0 dB; bal. output: +6 dB
Frequency response	20 Hz to 20 kHz, ±0.2 dB
THD + Noise	0.03% @ 1 kHz at nominal level
S/N	>90 dB at maximum output (unweighted)
Crosstalk	<-45 dB @ 1 kHz
Stereo channel separation	>80 dB @ 1 kHz

Audio input– P/2 DA8 A, P/2 DA12 A

Impedance	>10k ohms unbalanced, DC coupled
Nominal level	-10 dBV (316 mVrms)
Maximum level	+16 dBu, (unbalanced) at 1% THD+N
	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms,
	0 dBV 2 dBu

Audio output – P/2 DA8 A, P/2 DA12 A

Number/signal type	8 or 12 (depending on model) stereo, bal./unbal.
Connectors	(8) or (12) 3.5 mm captive screw connectors,
	5 pole
Impedance	50 ohms unbal., 100 ohms bal.
Gain error	±0.1 dB channel to channel
Maximum level (Hi-Z)	>+28 dBu, bal., >+20 dBV unbal. at 1% THD+N
Maximum level (600 ohm)	>+21 dBm, bal., >+18 dBm unbal. at 1% THD+N

Control/remote – P/2 DA8 Series, P/2 DA12 Series

Contact closure mute control	(2)		3.5 mm captive screw connectors, 4 pole and
	(2)		3.5 mm captive screw connectors, 3 pole
	Contact closure pin configurations
P/2 DA8 Series	A = mute all outputs, 1 = mute output 1,
	2	= mute output 2, 3 = mute output 3,
	8	= mute output 8
P/2 DA12 Series	A = mute all outputs, 1 = mute output 1,
	2	= mute output 2, 3 = mute output 3,
	12 = mute output 12

General

Power
P/2 DA4/6 xi	100 VAC to 240 VAC, 50/60 Hz, 12 watts, internal
P/2 DA8/12 Series	100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal
Cooling	Convection, no vents
Mounting - Rack mount
P/2 DA4/6 xi	Yes, with optional 1U, 9.5" deep rack shelf
	(RSU 129, part #60-190-01; RSB 129, 60-604-01);
	or 1U, 6” deep rack shelf (RSU 126, #60-190-10;
	RSB 126, 60-604-10)
P/2 DA8/12 Series	Yes, with included brackets, MBD 149, part
Furniture mount	#70-077-03
P/2 DA4/6 xi	Yes, with optional under-desk mounting kit,
	part #70-077-01 (MBU 125); or through-desk
	mounting kit, part #70-077-02 (MBD 129)
P/2 DA8/12 Series	Yes, with optional under-desk mounting kit
Enclosure dimensions	MBU 149, part #70-222-01
P/2 DA4/6 xi	1.6" H x 8.7" W x 6.0" D (1U high, half rack wide)
	(4.1 cm H x 22.1 cm W x 15.2 cm D)(Depth
	excludes connectors.)
P/2 DA8/12 Series	1.7" H x 17.4" W x 8.5" D (1U high, full rack wide)
	(4.3 cm H x 44.2 cm W x 21.6 cm D) (Depth
Product weight	excludes connectors.)
P/2 DA4/6 xi	2.0 lbs (0.9 kg)
P/2 DA8/12 Series	6.0 lbs (2.7 kg)
Shipping weight
P/2 DA4xi	4 lbs (2 kg)
P/2 DA6xi	5 lbs (3 kg)
P/2 DA8/12 Series	9 lbs (5 kg)
DIM weight (P/2 DA8/12 Series)
USA/Canada	10 lbs (5 kg)
International	11 lbs (5 kg)
Listings	UL, CUL
Compliances	CE, FCC Class A, VCCI, AS/NZS, ICES
NOTE: All nominal levels are at ±10%.
Model	Version Description	Part Number
P/2 DA4xi	1x4 VGA-QXGA	60-246-03
P/2 DA6xi	1x6 VGA-QXGA	60-245-03
P/2 DA8 A	1x8 VGA-QXGA with Audio	60-891-01
P/2 DA8	1x8 VGA-QXGA	60-891-02
P/2 DA12 A	1x12 VGA-QXGA with Audio	60-893-01
P/2 DA12	1x12 VGA-QXGA	60-893-02

Specifications are subject to change without notice.