Extron electronic PA 300 user manual Tabletop use, Rack mounting, #60-190-01 or

Tabletop use

Four self-adhesive rubber feet are included with the PA 300. For tabletop use, affix one foot at each corner of the bottom side of the unit and place the unit in the desired location.

Rack mounting

For optional rack mounting, do not install the rubber feet. Mount the PA 300 on a 6" deep, 1U high rack shelf (part

#60-190-10or 60-604-10) or a 9.5" deep 1U high rack shelf (part

#60-190-01 or 60-604-01).

1.Remove the rubber feet if they were previously installed on the bottom of the unit.

2.Mount the unit on the rack shelf, using two 4-40 x 3/16" screws in opposite (diagonal) corners to secure it.

3.Install blank panel(s) or other unit(s) on the rack shelf.

4.Attach the rack shelf to the rack using the supplied bolts.

6" Deep Rack Shelf 1/2 Rack Width Front False

Faceplate

Front false faceplate uses 2 screws.

(2) 4-40 x 3/16" Screws

Use 2 mounting holes on opposite corners.

Mounting the PA 300 on a 6-inch deep rack shelf

PA 300 Peaking Amplifier • Installation and Operation 2-3