Specifications — RGB 324, RGB 326, RGB 340
Video
Gain | Unity (0.7V |
| peaking |
Bandwidth | 300 MHz |
Video input
Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs | |
Connectors | 1 | |
Minimum/maximum levels | Analog | 0.3V to 1.45V |
Impedance | 75 ohms or Hi Z, switchable (set to 75 ohms if no local monitor is connected) | |
Horizontal frequency | 15 kHz to 100 kHz (optimum 15 kHz to 62 kHz) | |
Vertical frequency | 30 Hz to170 Hz |
Video output
Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs | |
Connectors | 5 BNC female | |
Minimum/maximum levels | Analog | 0.7V to 0.9V |
|
| peaking |
Impedance | 75 ohms |
|
Return loss |
Sync
Input type | RGBHV, RGBS, RGsB, RsGsBs |
Output type | RGBHV, RGBS, RGsB, RsGsBs; TTL buffered to RGB 320 control unit |
Input level | 3.0V to 5.0V |
Output level | 4.0V to 5.0V |
Input impedance | 10 kohms |
Output impedance | 75 ohms |
Max propagation delay | 45 nS |
Max. rise/fall time | 3.9 nS |
Polarity | Positive, negative |
Audio — buffered to RGB 320
Gain | Unbalanced 0dB, balanced +6dB |
Frequency response | 20 Hz to 20 kHz, ±0.05dB |
THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated maximum output drive |
S/N | >90dB at rated maximum output (17dBu), balanced |
Stereo channel separation | >95dB @ 1 kHz to 20 kHz |
Audio input — buffered to RGB 320
Number/signal type | 1 stereo, unbalanced; 1.0Vrms (+4dBu), 20 Hz to 20 kHz |
Connectors | 3.5 mm stereo jack (2 channel), unbalanced; tip (L), ring (R), sleeve (ground) |
Impedance | >10 kohms unbalanced, DC coupled |
Minimum level | 100mV |
Maximum level | +8.5dBu |
Audio output — buffered to RGB 320
Number/signal type | 1 buffered, stereo (2 channel), balanced/unbalanced |
Connectors | 1 3.5 mm captive screw connector, 10 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±0.1dB channel to channel |
Maximum level |
|
(into RGB 320 audio input) | > +16dBm, balanced at stated %THD+N |