Extron electronic RGB 500 AKM, RGB 560 AKM manual Specifications

SPECIFICATIONS

Video
Gain	Unity (0.70V p-p),	(0.725V
	p-p) 50% peaking,	(0.75V
	p-p) 100% peaking
Bandwidth	300 MHz (-3dB)
Video input
Number/signal type	1 analog RGBHV, RGBS,
	RGsB, RsGsBs
Connectors
RGB 500 AKM	1 9-pin D male, MBC/LBC
	cable or buffer
RGB 560 AKM	1 15-pin HD female
Minimum/maximum levels	Analog—0.3V to 1.5V p-p
	with no offset
Impedance	75 ohms or High Z, switchable
	(set to 75 ohms if no local
	monitor is connected)
Horizontal frequency	Autoscan 15 kHz to 130 kHz
Vertical frequency	Autoscan 30 Hz to 120 Hz
Return loss	-30dB @ 5 MHz
Maximum DC offset	4.0V
Video output
Number/signal type	1 analog RGBHV, RGBS,
	RGsB
Connectors	5 BNC female
RGB 560 AKM	1 15-pin HD female for
	buffered local monitor output
Minimum/maximum levels	0.70V to 0.75V p-p with no
	offset and 0.7V p-p input
Impedance	75 ohms
Return loss	-30dB @ 5 MHz
Sync
Input type	RGBHV TTL (±), RGBS TTL
	(-), RGsB 0.3V (-), RsGsBs
	1.3V (-)
Output type	RGBHV (±), RGBS(-), RGsB (-)
Input level	2V to 5.5V p-p with ±0.3VDC
	offset (max.)
Output level	4V to 5V p-p
Input impedance	10 kohms
Output impedance	75 ohms
Max. input voltage	5.7V p-p
Max. propagation delay	48 nS
Max. rise/fall time	3.5 nS
Polarity
AKM models	RGBHV: Polarity follows input
	when RGBHV is input and the
	sync polarity switch is set to
	Off. Sync polarity is negative

if the sync polarity switch is set to On.

RGBS, RGsB: Negative

Audio
Gain	Unbalanced 0dB, balanced +6dB
Frequency response	20 Hz to 20 kHz, ±0.05dB
THD + Noise	0.03% @1 kHz, 0.3% @ 20
	kHz at rated maximum output
	drive
S/N	>90dB at rated maximum
	output (14dBm), balanced
Stereo channel separation	>95dB @ 1 kHz to 20 kHz
Audio input
Number/signal type	1 PC level stereo, unbalanced
Connectors	1 3.5 mm stereo jack, 2
	channel; tip (L), ring (R),
	sleeve (ground)
Impedance	10 kohms, DC coupled
Maximum level	+8.5dBu, (unbalanced) at stated
	%THD+N
Audio output
Number/signal type	1 stereo (2 channel), balanced/
	unbalanced
Connectors	1 3.5 mm stereo captive screw
	connector, 5 pole, for left and
	right output
Impedance	50 ohms unbalanced, 100
	ohms balanced
Gain error	±0.1dB channel to channel
Maximum level (600 ohm)	> +14dBm, balanced at stated
	%THD+N
General
Power	12 to 24VAC or VDC, 0.35 A,
	5 watts, external (Order the
	power supply separately,
	part #70-055-01.)
Enclosure type	Ackermann GES9B
Enclosure dimensions — RGB 500 AKM, RGB 560 AKM
Interface	3.1" H x 8.1" W x 1.6" D
	(7.8 cm H x 20.6 cm W x
	4.1 cm D) (Depth excludes
	connectors and knobs.)
Shipping weight	3 lbs (1.4 kg)
Vibration	ISTA/NSTA 1A in carton
	(International Safe Transit
	Association)
Approvals	UL, CE
MTBF	30,000 hours
Warranty	2 years parts and labor
Part Numbers
RGB 500 AKM	60-313-01
RGB 560 AKM	60-314-01

Extron Electronics, USA	Extron Electronics, Europe	Extron Electronics, Asia
1230 South Lewis Street, Anaheim, CA 92805	Beeldschermweg 6C, 3821 AH Amersfoort	135 Joo Seng Rd. #04-01, PM Industrial Bldg.
800.633.9876 714.491.1500 FAX 714.491.1517	+31.33.453.4040 FAX +31.33.453.4050	+65.383.4400 FAX +65.383.4664
USA	The Netherlands	Singapore 368363

Copyright © 2001 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.

Extron Electronics Information ExtronWEB™: www.extron.com ExtronFAX™: 714.491.0192 24-hour access—worldwide!

01-04

68-565-01 REV. A