Specifications — RGB 580xi, RGB 580xi AAP models
Video — RGB 580xi
Gain | 0.35 V to 1.45 |
Bandwidth | 300 MHz |
Video input — RGB 580xi
Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs |
Connectors | 1 female |
Nominal level | 0.7 |
Minimum/maximum levels | Analog: 0.3 V to 1.45 |
Impedance | 75 ohms or high Z, switchable (set to 75 ohms if no local monitor is connected) |
Horizontal frequency | Autoscan 15 kHz to 150 kHz |
Vertical frequency | Autoscan 40 Hz to 140 Hz |
Return loss | |
DC offset (max. allowable) | 2.0 V |
Video input — RGB 580xi AAP, RGB 580xi I AAP, RGB 580xi S AAP, RGB 580xi SI AAP
Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs |
Connectors | 1 female |
Video output — RGB 580xi
Number/signal type | 1 analog RGBHV, RGBS, RGsB |
Connectors | 5 BNC female |
Nominal level | 0.7 |
Minimum/maximum levels | 0.35 V to 1.45 |
Impedance | 75 ohms |
Return loss | |
DC offset | ±5 mV maximum with input at 0 offset |
Video output — RGB 580xi AAP, RGB 580xi I AAP, RGB 580xi S AAP, RGB 580xi SI AAP
Number/signal type | 1 analog RGBHV, RGBS, RGsB |
Connectors | 1 female |
Sync
Input type | RGBHV, RGBS, RGsB, RsGsBs |
Output type | RGBHV, RGBS, RGsB |
Input level | 2 V to 5.5 |
Output level | TTL: 4 V to 5 |
Input impedance | 510k ohms |
Output impedance | 75 ohms |
Max. propagation delay | 85 ns |
Max. rise/fall time | 2 ns |
Polarity | RGBHV: Polarity follows input when RGBHV is input and the sync polarity switch |
| is set to Off. Sync polarity is negative if the sync polarity switch is set to On. |
| RGBS, RGsB: negative |
Audio
Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
S/N | >90 dB at maximum output, balanced (unweighted) |
Stereo channel separation | >90 dB @ 1 kHz to 20 kHz |
Audio input
Number/signal type | 1 PC level stereo, unbalanced |
Connectors | (1) 3.5 mm stereo mini audio jack (female) (tip, ring, sleeve) |
