Computer & RGB Switchers

SW2 VGA DA2 VGA Switcher Series

SPECIFICATIONS

Video

Gain. . . . . . . . . . . . . . . . . . . . . . Unity

Bandwidth. . . . . . . . . . . . . . . . . 300 MHz (-3 dB)

Video input

Number / Signal type.. . . . . . . 2 VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* Connectors. . . . . . . . . . . . . . . . 2 VGA female 15-pin HD

Nominal level. . . . . . . . . . . . . . 1.0 Vp-p for Y of component video

0.7Vp-p for RGB and for R-Y and B-Y of component video

Minimum / Maximum levels. . Analog: 0.3 V to 1.5 Vp-p with no offset

Impedance.. . . . . . . . . . . . . . . . 75 ohms

Horizontal frequency. . . . . . . . 15 kHz to 145 kHz

Vertical frequency.. . . . . . . . . . 30 Hz to 170 Hz

Video output

Number / Signal type

2 buffered VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video*

Connectors

2 VGA 15-pin HD female

Nominal level

1.0 Vp-p for Y of component video

 

0.7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum / Maximum levels. .

0.4 V to 1.8 Vp-p (follows input)

Impedance

75 ohms

NOTE: *RGsB and RsGsBs inputs and outputs will work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the 15-pin HD connector.

Sync

Input type

RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync

Output type

RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync

Input level

1.7 V to 5.0 Vp-p

Output level

TTL: 5.0 Vp-p, unterminated

Input impedance

510 ohms

Output impedance

50 ohms

Max. input voltage

5.0 Vp-p

Max. Rise / Fall time

40 ns

Polarity

Positive or negative (follows input)

Audio

 

Gain

Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±0.05 dB

THD + Noise

0.03% @ 1 kHz at nominal level

S/N

>90 dB at maximum output (unweighted)

Crosstalk

<-65 dB @ 20 kHz, <-80 dB @ 1 kHz and below 60 Hz

Stereo channel separation. . .

>80 dB @ 1 kHz

CMRR

>75 dB @ 20 Hz to 20 kHz

Audio input

 

Number / Signal type

2 stereo, unbalanced

Connectors

(2) 3.5 mm female stereo jacks

Impedance

>10k ohms, balanced/unbalanced, AC coupled

Nominal level

-10 dBV (316 mVrms)

Maximum level

+8 dBV, (balanced or unbalanced) at 1% THD+N

NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output

Number / Signal type.. . . . . . . 1 stereo, balanced/unbalanced Connectors. . . . . . . . . . . . . . . . (1) 3.5 mm captive screw connector, 5 pole Impedance.. . . . . . . . . . . . . . . . 50 ohms unbalanced, 100 ohms balanced Gain error.. . . . . . . . . . . . . . . . . ±0.1 dB channel to channel

Nominal level. . . . . . . . . . . . . . -2 dBu balanced, -10 dBV (316 mVrms) unbalanced Maximum level (Hi-Z). . . . . . . . >+16 dBu, balanced; >+8 dBV, unbalanced at 1% THD+N Maximum level (600 ohm). . . . >+10 dBm, balanced; >+4 dBV, unbalanced at 1% THD+N

Control / remote — switcher

Contact closure.. . . . . . . . . . . . Momentary, on a 3.5 mm captive screw connector Contact closure pin

configurations.. . . . . . . . . . . . . 1 = Input #1, 2 = Input #2

General

Power

SW2 VGA DA2 A/AF’s

external power supply.. . . . . . . . 100 VAC to 240 VAC, 50/60 Hz, external, universal; to 12 VDC,

1 A power supply, regulated

SW2 VGA DA2 A/AF’s

 

power input requirements

12 VDC, 0.2 A

SW2 VGA DA2 AF R

100 VAC to 240 VAC, 50/60 Hz, 12 watts, internal, universal

Temperature/ Humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

 

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Rack mount

SW2 VGA DA2 A/AF. . . . . . . . . . Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01 (RSU 129) or 60-604-01 (RSB 129); 1U, 6" deep rack shelf, part #60-190-10 (RSU 126) or 60-604-10 (RSB 126); or VersaTools® 1U, 3.5" deep rack shelf,

part #60-190-20 (RSV 123) or 60-604-20 (RSB 123)

Furniture mountable with included under-desk mounting kit, part #70-077-01 (MBU 125)

Attachable to a projector mount with optional PMK 200 projector mount kit, part #70-077-04

SW2 VGA DA2 AF R. . . . . . . . . . Yes, with included rack mounting kit, part #70-485-01 (MBD 123) Furniture mountable with optional VersaTools under-desk mounting kit, part #70-212-01 (MBU 123)

Enclosure type. . . . . . . . . . . . . Metal

Enclosure dimensions

SW2 VGA DA2 A/AF. . . . . . . . . . 1.0" H x 8.75" W x 3.0" D

2.5cm H x 22.2 cm W x 7.6 cm D (Depth excludes connectors.)

SW2 VGA DA2 AF R. . . . . . . . . . 1.75" H x 17.4" W x 3.0" D (1U high, full rack wide)

 

4.4 cm H x 44.2 cm W x 7.6 cm D

 

(Depth excludes connectors.)

Product weight

 

SW2 VGA DA2 A/AF

1.1 lbs (0.5 kg)

SW2 VGA DA2 AF R

2.6 lbs (1.2 kg)

Shipping weight

 

SW2 VGA DA2 A/AF

4 lbs (2 kg)

SW2 VGA DA2 AF R

7 lbs (4 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Listings

UL, CUL

Compliances

CE, FCC Class A, VCCI, AS/NZS, ICES

MTBF

30,000 hours

Warranty

3 years parts and labor

NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.

249

europe

dubai

Asia

china

Japan

+31.33.453.4040 / +800.3987.6673

+971.4.2991800

+65.6383.4400 / +800.7339.8766

+86.21.3760.1568 / +400.883.1568

+81.3.3511.7655

+31.33.453.4050 FAX

+971.4.2991880 FAX

+65.6383.4664 FAX

+86.21.3760.1566 FAX

+81.3.3511.7656 FAX

Page 3
Image 3
Extron electronic DA2 VGA Series, SW2 VGA Series specifications 249