Extron electronic System 10 Plus Audio input, Audio output, Control/remote - switcher, General

Frequency response	20 Hz to 20 kHz, ±0.05 dB
THD + Noise	0.015% @ 20 Hz to 20 kHz, worst case
S/N	>95 dB at maximum output
Crosstalk	<-85 dB @ 20 Hz to 20 kHz, fully loaded
Stereo channel separation	>60 dB @ 20 Hz to 20 kHz
CMRR	>60 dB @ 60 kHz

Audio input

Number/signal type	10 stereo, balanced/unbalanced
Connectors	(8 or 10) 5 mm captive screw connectors, 6 conductor
Impedance	>10k ohms unbalanced, 20k ohms balanced, AC coupled
Nominal level	-20 dBV (100 mV), -10 dBV (316 mV), 0 dBu (0.775 V), or +4 dBu (1.23 V),
	configurable

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

+4 dBu and 0 dBu are professional audio line level standards.

-10 dBV and -20 dBV are semiprofessional, computer audio, and consumer audio standards.

Maximum level	+13.2 dBu, (balanced or unbalanced) at 1%THD+N
Input gain adjustment	-95 dB to 0 dB, adjustable per input

Audio output

Number/signal type	1 stereo, balanced/unbalanced
Connectors	(1) 5 mm captive screw connector, 6 pole
	2 BNC female
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.2 dB channel to channel
Maximum level (Hi-Z)	> +19.2 dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm)	> +19.2 dBm, balanced or unbalanced at 1%THD+N

Control/remote — switcher

Serial control port	RS-232, 9-pin female D connector
Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations ....	2 = TX, 3 = RX, 5 = GND
Remote key pad control	(1) 25-pin D female
IR controller module	IR-201 (optional), part #70-142-01; or IR-301 (optional), part #70-143-01
Program control	Extron’s control/configuration program for Windows®
	Extron’s Simple Instruction Set (SIS™)

Control — projector

Projector control port ................. (1) 15-pin HD female

General

Power	90 VAC to 260 VAC, 50/60 Hz, 10 watts, internal, autoswitchable
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
	Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount	Yes, with attached rack ears
Enclosure type	Metal
Enclosure dimensions	5.25" H x 17.5" W x 9.6" D (3U high, full rack wide)
	13.3 cm H x 44.4 cm W x 24.4 cm D
	(Depth excludes connectors. Width excludes rack ears.)
Product weight	13.2 lbs (6.0 kg)
Shipping weight	20 lbs (9 kg)
DIM weight (International)	25 lbs. (12 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)

System 10 Plus • Specifications 1-3