TPR150 Twisted Pair Receiver
1. If desired, projector mount the receiver. Refer to the TPS150 transmission system manual.
2. Make all connections to the TPT150 switching transmitter. Refer to the TPS150 transmission system manual and the TPT150 transmitter label.
3. Connect a CAT 5 shielded twisted pair (STP) or foil shielded twisted pair (FTP) cable, terminated with
NOTE Extron recommends the use of STP or FTP cable only. | 5 | 1 |
4. Connect the RGB video, component (Y, |
|
|
composite video outputs to a projector or other video device. |
|
|
5. Connect a serial cable between the | 9 | 6 |
6. Connect power. |
|
|
Smear correction – Press the Cable Equalization Select button as necessary to light the Low Frequency LED. Press the + or – button to adjust for the best image display.
Sharpness correction – Press the Cable Equalization Select button as necessary to light the High Frequency LED. Press the + or – button to adjust for the best image display.
Convergence correction – Use a small,
CAUTION Do not connect this device to a computer data or telecommunications network.
Pin Signal
2RX
3 TX
5Gnd
www.extron.com
08 04 Printed in the USA
Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia
1230 South Lewis Street | Beeldschermweg 6C | 135 Joo Seng Road, |
Anaheim, CA 92805 | 3821 AH Amersfoort | PM Industrial Building, |
USA | The Netherlands | Singapore 368363 |
714.491.1500 | +31.33.453.4040 | +65.6383.4400 |
Fax 714.491.1517 | Fax +31.33.453.4050 | Fax +65.383.4664 |
Extron Electronics, Japan
Daisan DMJ Bldg. 6F
Fax +81.3.3511.7656