Extron electronic VSC 900D manual Specifications, Model Part Numbers, Included Accessories

SPECIFICATIONS

VIDEO INPUT

Number/signal type	1 RGBHV, RGBS, RGsB, component
	video with 1 buffered loop-through;
	1 RGBHV, RGBS, RGsB with 1 buffered
	loop-through
Connectors	2 x 5 BNC female (5 BNCs for
	RGB/component video input,
	5 BNCs for RGB/component video
	loop-through)
	(1) 15-pin HD female for RGB input,
	(1) 15-pin HD female for buffered RGB
	loop-through(RGB)
Minimum/maximum levels	0V to 2.0V p-p with no offset at unity
	gain
Impedance	75 ohms
Horizontal frequency	Autoscan 24 kHz to 100 kHz
Vertical frequency	Autoscan 50 Hz to 120 Hz
Resolution range	Autoscan 560 x 384 to 1600 X 1200
Maximum DC offset	2.0V
External sync (genlock)	0.3V to 1.0V p-p

VIDEO PROCESSING

Encoder	10 bit digital
Digital sampling	24 bit, 8 bits per color
Colors	16.8 million
Horizontal filtering	8	levels
Vertical filtering	4	levels
Encoder filtering	4 levels

VIDEO OUTPUT

Number/signal type	1 RGBHV, RGBS, RGsB, or
	component video;
	1	SDI component video
	(VSC 900D only)
	1	S-video
	1	NTSC/PAL composite video
Connectors	5 BNC female:
	RGBHV/RGBS/RGsB/component video
	1	BNC female: SDI component video
	(VSC 900D only)
	1	4-pin mini DIN female: S-video
	1	BNC female: composite video
Minimum/maximum levels	0.0V to 1.0V p-p
Impedance	75 ohms

SYNC

Input type	Autodetect RGBHV, RGBS, RGsB
Output type	RGBHV, RGBS, RGsB
Genlock connectors	1 BNC female: genlock input 1 BNC
	female: genlock output (terminate
	w/75 ohms if unused)
Standards	NTSC 3.58, PAL
Input level	1.5V to 5.0V p-p
Output level	TTL: 5.0V p-p
Input impedance	600 ohms
Output impedance	75 ohms
Max. input voltage	5.0V p-p
Polarity	Negative

CONTROL/REMOTE — SCAN CONVERTER

Serial control port	RS-232/RS-422, 9-pin female D
	connector
Baud rate and protocol	9600, 8-bit, 1 stop bit, no parity
Serial control
pin configurations	2	= TX, 3 = RX, 5 = GND,
	9	= hard-wired IR
IR controller module	VSC Remote
Program control	Extron’s control program for Windows®
	Extron’s Simple Instruction Set™ (SIS™)

GENERAL

Power	100VAC to 240VAC, 50/60 Hz,
	30 watts, internal, auto-switchable
Temperature/humidity	Storage -40° to +158°F (-40° to +70°C) /
	10% to 90%, non-condensing
	Operating +32° to +122°F (0° to
	+50°C) / 10% to 90%, non-condensing
Rack mount	Yes, with optional brackets
Enclosure type	Metal
Enclosure dimensions	1.75" H x 17.5" W x 9.5" D (1U high,
	full rack width) 4.4 cm H x 44.5 cm W
	x 24.1 cm D (Depth excludes
	connectors and knobs)
Product weight	5.6 lbs (2.5 kg)
Shipping weight	12 lbs (5.45 kg)
Vibration	ISTA/NSTA 1A in carton
	(International Safe Transit Association)
Listings	UL, CUL
Compliances	CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF	30,000 hours
Warranty	3 years parts and labor
Model	Part Numbers
VSC 900	60-478-01
VSC 900D	60-478-02
VSC Remote	70-206-01
Included Accessories
VSC IR Remote	70-206-01
BNC termination adapter	26-300-01
SVHSF (1.83 m)	26-316-02
Optional Accessories
Under desk mounting kit	70-219-01
1U Rack Shelf	60-190-01
SVHSM-BNCF Adapter	26-353-01
RCA (female), BNC (male)
Adapter	10-264-01
S-video cable 6' (1.83 m)	26-316-02
SDI output card	70-065-02

Specifications are subject to change without notice.