Faber MR-11, MR-16 manual Halogen Bulb replacement instructions

Halogen Bulb replacement instructions:

If your halogen bulbs need replacement, please follow these instructions below. You will need a 1” wide suction cup, available thru Faber or local hardware store.

Step 1: Purchase a new MR-11 or MR-16 (Pellicano), 12 volt, 20 watt halogen bulb with a glass lens cover.

Step 2: Using the suction cup gently push against the bulb in the hood making a seal around the bulb.

Step 3: Pull down on the bulb with the suction cup, to remove the bulb from the hood

Step 4: Place the new bulb into the hood, lining up the bulb prongs with the holes inside the hood.

For more information please call Faber at

508-358-5353 or email info@faberonline.com

Step 1

Step 2

Step 3

Step 4