18 | TOLL FREE: |
FM765MC_31_IB_E_100510_paths.indd
PROBLEM |
| SUGGESTED ACTION | |
|
| ||
| Reset Motor Thermostat: | ||
| 1. | Push the On/Off pedal once. | |
Vacuum Shut | 2. | Unplug the unit. | |
3. | Check the source of the overheating problem (i.e. clogged hose | ||
Off Due to | |||
| or filter, full bag). Unclog the hose, change bag and clean the | ||
Overheating |
| ||
| filters if necessary. | ||
(motor protective |
| ||
|
| ||
thermostat | 4. | Wait at least 45 minutes before attempting to reuse the | |
automatically |
| vacuum. After the unit has cooled down for 45 minutes, plug in | |
turned off unit) |
| the vacuum cleaner and step on the On/Off pedal. The vacuum | |
|
| should start again. |
5.If the vacuum still does not start, contact customer service at
| 1. | Plug in firmly. |
Vacuum Won’t | 2. | Reset circuit breaker or replace fuse. |
Run | 3. | Step on On/Off pedal to turn on. |
| 4. | Reset motor thermostat. |
1.Put in a new HEPA dust bag.
2.Adjust carpet height setting.
3.Remove obstruction from air path.
Vacuum Won’t | 4. Replace belt if broken. | |
Pick Up | ||
|
5.Push telescopic tube and flexible hose in securely.
6.Push floor attachment or accessory in securely.
7.Clean/change filters.
Vacuum Picks Up |
|
|
|
Moveable Rugs | 1. | Adjust carpet height setting. |
|
Or Pushes Too |
| ||
|
|
| |
Hard |
|
|
|
|
|
|
|
Rotating Brush | 1. | Replace belt. |
|
Does Not Turn | 2. | Check belt changing instructions. |
|
|
|
|
|
Air Flow | 1. | Open the manual suction control on the handle of the flexible | |
Restricted With | |||
Attachment, |
| hose. |
|
Sound of Vacuum | 2. | Remove obstruction in air path. |
|
Changes |
|
|
|
|
|
|
|
Cord Does Not | 1. | Straighten or |
|
Rewind |
| ||
|
|
| |
|
|
|
|
|
| www.fantom.com | 19 |